isitafox Posted January 2, 2013 Report Share Posted January 2, 2013 Why the xc hub and shimano cranks? Quote Link to comment Share on other sites More sharing options...
dezmtber Posted January 2, 2013 Author Report Share Posted January 2, 2013 I probbaly put the wrong hub. It's the halo singlespeed hub same as the hope trial hub. Just different pawl setup. Taking a but of a risk trying it out for trials I just like the 6 pawl system it looks much like the insides of my tensile freewheel. I already had the shimano cranks I will probably get something stronger when they break. Quote Link to comment Share on other sites More sharing options...
aener Posted January 2, 2013 Report Share Posted January 2, 2013 Thank god those aren't maggie mounts, or you'd have a tough time tightening the rear bolts. Not to mention running a chain I thought the same as everyone else even though I saw it in the flesh just the other day, and it didn't have them on Thought it might've been an afterthough until I thought about just how impossible to run they would be. Haha. Freaky photo angle is freaky! 2 Quote Link to comment Share on other sites More sharing options...
FamilyBiker Posted January 3, 2013 Report Share Posted January 3, 2013 JustAnotherFrame...Builder JumpAndFun Quote Link to comment Share on other sites More sharing options...
dezmtber Posted January 3, 2013 Author Report Share Posted January 3, 2013 Rear wheel complete ready to fit tmz. Even my cat is doing trials now, just Soo exited about getting it built and ridden 1 Quote Link to comment Share on other sites More sharing options...
FamilyBiker Posted January 3, 2013 Report Share Posted January 3, 2013 did she go up to front ? Quote Link to comment Share on other sites More sharing options...
Danny00135 Posted January 3, 2013 Report Share Posted January 3, 2013 Can't wait to see this built up, small video would be nice too :wink2: Quote Link to comment Share on other sites More sharing options...
dezmtber Posted January 3, 2013 Author Report Share Posted January 3, 2013 my cat does the best hooks 1 Quote Link to comment Share on other sites More sharing options...
shercofray Posted January 3, 2013 Report Share Posted January 3, 2013 How come you didn't go with a pro 2? Quote Link to comment Share on other sites More sharing options...
dezmtber Posted January 3, 2013 Author Report Share Posted January 3, 2013 The halo seems better imo. I know the pro 2 is good and will get one if the halo is crap Quote Link to comment Share on other sites More sharing options...
ghostrider88 Posted January 3, 2013 Report Share Posted January 3, 2013 Halo has alu freewheel body, that´s enough to put me off. Quote Link to comment Share on other sites More sharing options...
dezmtber Posted January 4, 2013 Author Report Share Posted January 4, 2013 Do you mean the cogs dig into the freehub body or the paels will dig in? I. Am using fat foot cogs Quote Link to comment Share on other sites More sharing options...
LEON Posted January 4, 2013 Report Share Posted January 4, 2013 I think he means more that the freehub will fall apart, I wouldn't touch an alloy one for trials. 1 Quote Link to comment Share on other sites More sharing options...
FamilyBiker Posted January 4, 2013 Report Share Posted January 4, 2013 steel is reel Quote Link to comment Share on other sites More sharing options...
ghostrider88 Posted January 4, 2013 Report Share Posted January 4, 2013 I think he means more that the freehub will fall apart, I wouldn't touch an alloy one for trials. Exactly Quote Link to comment Share on other sites More sharing options...
dezmtber Posted January 4, 2013 Author Report Share Posted January 4, 2013 After a good look into this freehub. The pawls sit in a steel holder which is threaded to the alloy cog carrier. I am not keen on the fact its threaded alloy to steel. So long as I don't wreck those threads it will be ok. But I tryed the hope freehub body on the halo and it fits so I will bodge one of those on if the halo fails. And if that then fails hope all the way. Jafs finished the frame its in the post. Quote Link to comment Share on other sites More sharing options...
Ali C Posted January 4, 2013 Report Share Posted January 4, 2013 I've used that hub, I stopped using that hub. 12 Quote Link to comment Share on other sites More sharing options...
Lewis Gething Posted January 4, 2013 Report Share Posted January 4, 2013 Are the JAF graphics created in house Josh, or are they made at a specialist? Frame looks great good job! Quote Link to comment Share on other sites More sharing options...
LEON Posted January 4, 2013 Report Share Posted January 4, 2013 After a good look into this freehub. The pawls sit in a steel holder which is threaded to the alloy cog carrier. I am not keen on the fact its threaded alloy to steel. So long as I don't wreck those threads it will be ok. But I tryed the hope freehub body on the halo and it fits so I will bodge one of those on if the halo fails. And if that then fails hope all the way. Jafs finished the frame its in the post. You'd be miles better off with a Hope xc. Seems a waste to have a nice new frame & stuff, then top it off with a piece of shit carrying every pedal stroke. I looked at them once, then I looked away. Quote Link to comment Share on other sites More sharing options...
stunt man t Posted January 4, 2013 Report Share Posted January 4, 2013 (edited) Jafs finished the frame its in the post. whens it gonna be built? Edited January 4, 2013 by stunt man t Quote Link to comment Share on other sites More sharing options...
Rob Leech Posted January 4, 2013 Report Share Posted January 4, 2013 (edited) Are the JAF graphics created in house Josh, or are they made at a specialist? Frame looks great good job! Yep, all in house. It's just easier that way with people wanting different things . whens it gonna be built? It will be with him sometime tomorrow, so keep an eye out, I'm sure he is . Edited January 4, 2013 by Rob Leech 1 Quote Link to comment Share on other sites More sharing options...
Lewis Gething Posted January 4, 2013 Report Share Posted January 4, 2013 Yep, all in house. It's just easier that way with people wanting different things . Big ups man, you have some really cool stuff going on with JAF! Quote Link to comment Share on other sites More sharing options...
dezmtber Posted January 4, 2013 Author Report Share Posted January 4, 2013 It will be built Monday 1 Quote Link to comment Share on other sites More sharing options...
FamilyBiker Posted January 5, 2013 Report Share Posted January 5, 2013 (edited) ali,is that thing high on EP or 3 pawls engaging at one time? edit:just seen on their homepage:120 teeth drive ring in that diameter!? i think it will get tooth decay Edited January 5, 2013 by FamilyBiker Quote Link to comment Share on other sites More sharing options...
dezmtber Posted January 5, 2013 Author Report Share Posted January 5, 2013 It's 3 pawls at s time they take it in turns. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.