Jump to content

almost a Hydroxx mod build...for sale?


trials hoe

Recommended Posts

So a dd mod is going to happen this time, is the long incarnation unsure of the geo other than it has 360cs and 615 reach (crude tape measure method) so I'm expecting a 1025 wb with a 45 bb iirc...uf anyone knows the accurate numbers that would be sweet if you could chime in with it :)

Currently stands me at just under a ton, including some echo forks and Tt bars (paid for today so not pictured, cheers Connor fitch :) ) frame came from UKhippy *insert good seller props here* as did the tyres and the Tt rim. Xt 4 pot returns again :D front wheel will be built over the weekend.

A shitty pic, will sort a better one out minus the resizerape.

post-30295-0-09583500-1396024716_thumb.j

Will also be needing some more stuff to finnish so would be nice if this could serve as a wanted ad too...when I have some more pennies to spend on it ha.

Chris

Edited by trials hoe
  • Like 1
Link to comment
Share on other sites

it is so strange to see that frame over there....

Good luck with your build buddy :)

Cheers dude :) isn't too far of being a rideable build with what I have so far, hopefully not a long way away...

XT 4 pot. I'd kill for one of those

I'd stab a granny for another, even just a caliper haha

Link to comment
Share on other sites

  • 4 weeks later...

That front wheel is awesome!!!!!

half and half would have looked better (defo while spinning), going to do the rear that way and prob the same on the 24 too.

on that note, I need...

rear wheel with cams and sprocket, disc hub would be super,

square taper ffw cranks shorter the better,

pedals, as long as they're better than the invisible offerings i have now they'll be great,

a pair of maggie slaves,

05 maggie lever, 4 finger jobbie,

if anyone has any of the above give me a shout!

Link to comment
Share on other sites

  • 2 weeks later...

i'll stick a sort of spec here so others can see :)

hydroxx long frame (maggie threads need some attention unless you're a delicate tighteneruperrur)

echo sl's (intergrated c/r)

fsa pig sealed h/s

180 x 35 (ish) stem

tt low rise bars uncut

tt square hole front rim on rockman bub disc hub (reet good nick) 3x cross pattern both sides with a kenda small block 8 2.1

my dignity if i can find it

sq taper bb (as much as i know there)

tr slaves (from the 24) and an empty racingline lever body

maxxis cc rear tyre in need of slicking

a hope mono mini front brake* +20 caliper and a lever seal kit

a suitable sized rotor for the brake

some used tt foams (thick) a mars bar and whatever else i've forgot that falls in the box it gets posted in (Y)

*was binding when i last used it, so the caliper piston seals are prob shagged.

Link to comment
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...