Right here goes, this is how i do it and get a perfect bleed everytime; Tools needed: .5mm allen key, .3mm allen key, .Bucket, .Water, .Antifreeze, .Rag 1.Use the search, 2.Remove the brake pads, 3.Add the antifreeze as required, 4.Add the water to the bucket, 5.Unsrew the tpa all of the way out, 6.Unscrew the bolt on the caliper (5mm), 7.Pump the lever about 20 times, or until you see no air coming out, 8.Tighten the bolt up, 9.Undo the 3mm bolt on the lever, 10.Pump the lever another 20 times, 11.Screw the bolt back in, 12.Dry the brake off, 13.Pump the lever a few times to get it going, 14.Put the pads on the magura 15.Fit to the bike 16.Ride 17.Thank me very much for spending my time helping you Lol...