alex_jsy

http://rapidshare.com/files/244639998/Sony...Unlock_Tool.rar works with C510, C702, C901, C902, C903, C905, G905, G705, K630, K660, K850, K858, T700, TM506, V640, W595, W705, W715, W760, W890, W902, W908, W910, W980, Z750, Z770, Z780 Alex

I don't reckon there needs to be much R&D on most of the ECHO/GU etc. products as they're pretty much perfect for what they've been designed for. They seem to have got it right in terms of frame strength and all that and dont see why they would need many protos, there's not much new developments which would need them either considering all his frames from the last years have been near identical.

They seem very promising at the moment, but they've only just been fitted so couldn't give you a definite answer yet. Even though they've not worn in they haven't slipped on me at all. I could definitely see a grind working well with these but i enjoy the modulation on a smooth rim and the pads suit this perfectly! They're also completely silent at the moment which makes a difference

dk iron cross grips, nice and comfy on your hands and the bar ends stop the grip slipping all over your bars

Had this bike for a while now and I've got to say that its the best bike I've ever ridden. Finally finished so thought I'd post it up here for you lot to have a look. Spec front (rhyno lite on pro2) rear (kris holm on pro 2) urban forks Tryall stem with spank bars bb7 up front middle burns revel pedals kmc chain vee on the rear also trying to run another gear on the back making getting places easier without having to play around with a set of gears + deralleur etc. but the problem is that the chain seems to ride up the cog (12t - gusset bachelor) whenever i start pedaling, any ideas what the problem could be? only thing i can see being a possible problem is it's a 5/64 sprocket, have any of you had this problem with this cog before? any ideas how to fix it? Alex

had problems with my khe chain too... seems that my tensioner wasn't keeping the chain tight enough due to there being so many stiff links, best thing to try is maybe taking a link out if you can, if not lube up the chain as much as you can to make it less stiff if that fails try another chain, switched to my half link chain and had no problems...until it snapped

Either Southampton or Exeter to do Mechanical Engineering need to get the grades first though (AAB)

Alright, got my bike set up all nice, only problem was the chain was skipping loads! Was using one of the £10 mr control tensioners all set up right then i switch to a big fat derailleur and it seemed fine. Now wanted to add another gear to make it easier to cycle round places (one for trials, one a bit harder) and since fitting it to my bike the chain just skips like crazy on the gear I'm pretty sure this is down to the chain not being tight enough. Using a KHE Collapse (short as possible on the setup) on 20x16/12 gearing (Cogs are as central as possible to give a nice straight chainline) Any ideas how i could sort this out?

You have recieved a new feedback. Below are details concerning the new feedback. Type: Good Rating Summaryeasy to contact, great guy to deal with! Given By: alex_jsy You were the: Buyer Date: 1202587296

You have recieved a new feedback. Below are details concerning the new feedback. Type: Good Rating Summaryall sorted out quickly and packed nice and safe, good lad Given By: alex_jsy You were the: Seller Date: 1202334524

looks hoofing mate! reminds me of the 24" ciguena they had on tarty with the pink/black hope mine looks and rides as good, going for a blue/white/black build inspired's seem to be getting really popular, onza zoots are fairly similar and i don't remember seeing as many of them around when they were released

You have recieved a new feedback. Below are details concerning the new feedback. Type: Good Rating Summarysorted efficiently and sent quickly, good lad Given By: alex_jsy You were the: Seller Date: 1202221569