Jack Morton

How long have you been riding? One year Favourite or dream bike? Gu Typhoon Best place to ride? Somwhere with lot's of pallets Preferred brake set up? Hydraulic Rim brake rear , Hydraulic Disk brake front. Preferred size, 20" or 26"? 20" Favourite make or manufacturer? Echo How often do you ride? Every day Best or favorite trick/move? Gapping Bigggest gap? 7ft 3inches Biggest drop? about 3 meters Preferred ride(street, rocks, etc)? Street What do you most want to be able to do on your bike? Side-hop Helmet or not? Most of the time

I'm clueless on how it happend but not very happy about it What brake do you recomend i buy now

I was out on my bike before trying to improve on my gapping and out of the corner of my eye i saw a silver line on the back of my magura hs33 05. Like between where the brake lever bolts in and the cylinder , piston thing. On closer inspection i found that is is cracked but, I wanted to no if this has happend to anyone eles Magura hs33. I dont even no how is has happend because i no that i havn't banged it on anything could this just be a fault of the lever and also, What brake lever do you recomend i now buy ?. Here is a picture of it

This isn't going to get you validated to be perfectually honest this thread is rather pointless.

Sorry if i am clogging up this thread but i was out on my bike before trying to improve on my gapping and out of the corner of my eye i saw a silver line on the back of my magura hs33 05. Like between where the brake lever bolts in and the cylinder , piston thing. On closer inspection i found that is is cracked but, I wanted to no if this has happend to anyone eles Magura hs33. I dont even no how is has happend because i no that i havn't banged it on anything could this just be a fault of the lever and also, What brake lever do you recomend i now buy.

sorry wouldn't be able to recomend a stem due to me only riding a 20" although if i had to choose i would say Trialtech sport forged http://www.tartybikes.co.uk/product.php?pr...;category_id=41 there is a link hope this help's

I would say a Onza Rip or Onza Bird. Have a look on www.tartybikes.co.uk and deside on a one you like, Also people arn't aloud to sell in the NMC wait until you get validated and then try and get one from the For sale section

When i first started i could do nothing at all. Took me months to learn to hop on my back wheel and then another 3 - 4 months to learn to pedal kick. I would say the first big thing i did well, i thought it was big was wheelying of a table.

My best gap is 2 meters 24cm and if i am correct , that would result in 7ft 3inch. Although by the end of the summer i hope i will be in the 8ft margine.

Get Gu riser bars them are the same geometry as the Zoo riser bars here is a link if you are intrested in them, Look at them. http://www.selectbikes.com/index.php?act=v...p;productId=206

Go to the ticket office where you buy you're tickets from and ask.

Yeah well i will get some pictures up when i've finished if i don't mess up to much might be a while though as i have another project on the go at the moment.

For 20" bikes i recommend Onza Rip or, Onza Bird both are around the £300 price mark. For 26" bikes i recommend Koxx Acid drop or, Onza SpyroGyra Both once again are round the £300 price mark.

I've got some on my T-mag after i snapped my aluminuim one's which i had one my T-mag so start of with.

Can i just say Onza ones arn't that bad, He is most likually to be a beginner so Onza ones would be fine for him. Anyways what have you got against Onza they have come a long way in the last couple of years. Also check out this link http://www.trials-forum.co.uk/forum/index....howtopic=133099 you will find out what you want there. Also can i just state now that i am not trying to sell in the NMC i am just pointing him in the right direction. Try to email him mate hope this helps

Get a Onza Bird and change the rear brake to a Magura hs33, and the front to a Magura Louise.

Hi i live in penrith , cumbria and the people i ride with are coming out less and less So i wanted to no if there is anyone in the Penrith area maybe , Carlisle or Kendal. Just around the Penrith area Which rides most weekend and wouldn't mind me coming along for a ride aswel.

If it was my frame i would spray it two tone i no it would be very expensive. But it would look really smart, Owell thats just me though and also if you have you're heart set on Matt black. I recomend Satin black to you, I belive it has a better finish to it.

Who is the Ali Clarkson from tartybikes ?

Nope. I dont want to make forks , i've got the things to make a frame and also my welding technique is fine.

To me this sounds like you are trying to sell it you're not aloud to in NMC.

Nah i dont like monty frames i want a straight down frame to copy the geometry

My dream frame that is mate. What bike do you ride at the moment.

20" and I am not sure on the frame which i would copy the geometry from which frame do you recomend