brad1995

Yeah im aware of this but im sure he can remember if the brakes worked well or not.

What were the jetset rims like on this bike ? they hold grinds well and also work well with brake pads ?

I would say maybe loosen off the lever blade bolt a wee bit and also take the piston out and put some grease in between the two o-rings on the piston. Good luck!

http://www.argos.co.uk/static/Product/partNumber/3382141.htm

Stole my contraption there like brad !

You guys can blame the song choice on me :/ This was just just a quick edit i put together

I thought you would of found them by now baxter who ever it was !

I will just leave it how i have put it then , thanks for the replies!

Thats the way i have put them in, but i was thinking that if i put them one short then one long, 3 engage at a time and it will be offset so it will be all the long engaging then all the shorts :/

Hi, i have a spare ENO Trials freewheel that i decided i would take apart and service and i was just wondering if anyone knows what order the pawls go in because there are 3 long ones and 3 short ones and i didn't check how they were before i went and pulled them suckers out of there . Thanks, Brad.

Forgot about the, Try-All sticky tyre HS11 kmc610hx TNN clamps TNN LGM refills Onza offset sprocket

Echo lite frame, Trailtech forks, Hope mini, echo sl headset.

There is a little spacer that goes in between the freehub body and the inner bearing of the hub shell that you will more than likely of missed out if its stiff when you pedal but not when the wheel spins, i made the same mistake. This video should clear things up if so.....

I used to be decent at them but all of a sudden i'm rubbish !