-
Posts
1938 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Brisa
-
Well, I went over on my ankle a few months ago and went to the hospital. Was a sprain. It has never really healed properly by the feels of things but I went out on the pitbull yesterday for the first time in ages. Sidehopping some pallets and bailed onto my ankle again. Once this heals I would like some sort of good support before I ride again. I work in JJB sports and have had a look at their ankle support but it doesn't look like it will do much. Any suggestions and where to get them would be great.. Thanks
-
Nope he meant what he said, you just didn't read it properly >_<"
-
I have the exact front freewheel set up you suggested. Echo cranks/ACS and a welded up deore. I have ran FFW for a while on different bike and liked it but experimented with revolver/ACS set up whiich was good but went back to FFW for clearance reasons on my pitbull. FFW is great. I always weld my lockring on the ACS though and they last, don't know how long but I can't see anything happening to them once welded. ZOO! bash guard is tasty, at around £15 its quite good value for money.
-
It is quite disturbing and I agree the skinning alive thing is wrong and inhumane. When i'm out hunting with the air gun where you have one shot one kill scanerio you really have to get mr rabbit in the scone to stop him dead. Sometimes this doesn't stop them in their tracks as their brain is still sending signals to their body resulting in them jumping about. The only way to stop this is to stretch it's neck rather than to have it suffer. All i'm saying is that to break that animals neck they are hardly going to be able to do it grabbing its legs and neck and pulling as its some size of an animal. What methods of dispatch are they left with? Not a lot that won't cost a lot or damage the fur so they have to try and break their (strong) necks by putting in a significant amount of force (i.e bladdering it off the deck) Some of their methods I disagree with but the swinging and beating in my mind would be the only way for them to kill them efficiantly for their trade (livelihood). IF YOU ALL THINK THATS WRONG, LIVE IN N.I AND INVESTIGATE PARAMILITARY MOVEMENTS. f**k ANIMALS, THESE PEOPLE RUIN COMMUNITYS AND PEOPLES LIVES! I THINK ITS MORE IMPORTANT.
-
Grinds ARE the dogs bollocks and you have f**k all to put in your experiance bag. Saying that the pads arent set up properly because of wide rim/narrow frame is no excuse. Do what other people do and take the pads down to a reasonable size. With a grind you need everything perfect, amazing pads set up is crucial. With tar it doesnt really matter one bit how they are set up to be honest. (looking at my brake as a beginner) Writing off a grind without trying to set it uo properly is a bit silly and some day a grind will ome in handy when your tar turns to shite!
-
Sorry to say but that comment falls into the 'full of shit' tank... Bar and stem may make a difference but moving from a back ache bike to a new bike using the same bar and stem would suggest that frames do actually cause back ache if your other frame with geo more suited to your build doesn't hurt. Me had Curtis T1 comp with 100mm 5deg stem and EA30's Same bar and stem on a ZOO! pitbull 1085 and back ache is all gone.
-
It'll be the last place you look :lol:
-
I really think if you look at that bash and the mounts they have all shifted forward like that due to the front mount playing hide and seek! It's hardly going to stay on one perfect shape considering at the moment of failure it would be using 2 rear mounts instead of evenly distributing the force. Either way with a back up like that on a frame thats barely over a month old from a company that usually is pretty fair as far as warranty cases go is shit! I think onza should go down the CLS Python route and leave the bash off if thats going to happen. Why put in there if its not for using? Its obvious its going to be the most abused part of the frame and if abused as you say it has been why didnt the bash fail first?
-
Up above Siders pic shows some chain tugs being used. As far as im aware you will have to mod them.
-
I reckon aaroncosbey could give that a go. He's a bit springy when it comes this jumping about thing.
-
lol, if I had vid footage of what happened to me you would be very surprised at the damage. Were talking large kerb rolling off and no forks when you wheel touches the ground. Face implant and teeth missing. Non pleasent experiance.
-
Your headset or disc wont hold you teeth in though.
-
Oh no, it actually holds the steerer into the crown! They are pressed in and glued. I had a costly run in with orange trials forks involving a trip to A&E. PM me for the pic... I thought I was just unlucky and got another set of bonded forks... Lite guys and snapped them within the month. I didn't hook and was learning taps. Ask Tart or someone with a bit of knowledge on the bonding process. May be able to give you a better/right way of how it happens.
-
Thats the glue that holds you fork together. If they have flexed enough for the glue to crack I'm definately sure I wouldn't be using them again.
-
You can get your provissional at 16 for DEFINATE but you cannot learn to drive a car until your 17...
-
You can apply 2 weeks before your 16
-
Sorry mate, that is as direct as you will get without registering. Good site though (Y)
-
Don't have it on my computer but here's the link. Don't know if this is any good for you or not though (Y) Vincy Right Clicky
-
Its homemade based around a levelboss I believe...
-
I just got a pitbull 1085 after copming from a Curtis and a Levelboss 1065 previous to that and the pitbull is astonishingly lovely!
-
Haha, fair doo's... couldn't remember what size it was.
-
I'd go for the Juicy if your sure about changing but keep the cable set up too. Never know.. you might just want that little cable back. NBRtrials or something like that has a Juicy and he was giving it loads of praise a while back. Maybe you should contact him.
-
You seem to be tarring everyone on benifits with the one brush. You might want to add... "worked 10 years of his life as lawnmower specialist until company burnt down leaving redundant with no proof of qualifications becomming a carpet layer for another 10 years to provide for family until he gets a nasty knee injury that lands him in hospital every few months" This is the case with my dad, he has contributed a f**k load more than any whinger on here as far as tax goes and probably the same as most of your parents. He is now on benifits as he is unfit to work and can hardly walk. I do agree with the lazy ones who can get a job but don't being kicked off! I also don't know how they get it in the furst place. My dad gets checked once a year, and gets a proper full medical check. How do the ones not ill get away with it?
-
Likewise, as soon as I get my paypal account to stay open for more than 2 days (bank account adding them going away?) then I will have one of each! Glad to see you went with the bands. I hope it works out well :P
-
I left school 2 years ago and Im now at college. I have 100% attendance at college in these last 2 years ( even went in the day after I busted my face) because it is such a nice place to be. School I had around 63% attendance in year 12 and that was one of the better years. I hated the place, disgusted me something shocking. I miss nothing about it and no one in it.
