Jump to content

John planet x

Members
  • Posts

    500
  • Joined

  • Last visited

Everything posted by John planet x

  1. Pure crap video. They think drinking is so cool
  2. Yeah you can easily see its fake lol Nice video
  3. Photographs taken by Mark Leetch, visit www.wakeuphate.com for more
  4. John planet x

    A3

    Didnt ever think i'd like a 20", but i like this one. Just finished building her, apart from setting up the back brake :/ some reason the wheel aint dead center in the frame so one side of the magura is too close.
  5. Thanks for reply. I just went out a measured it up, from the BB to the front cog its rougly 4.8cm (dont have my 6 inch rule at home). And from rear hub to tensioner jockey wheel it is 6.5cm. A fair difference. I also noticed that the plain portion of the bolt that goes into hanger is a couple of thou too big, making the whole tensioner wobble once fitted. As for the BB, it is shimano 127mm
  6. Ok here is my set up: Frame: Limey Back wheel : Full chris king HD spaced on old cassetee spacers +14t cog Cranks: Middleburn n Ti bash ring + 16t cog (square taper) Chain: KMC Kool fat one BB: Shimano , some long one. Right, well i baught this thinking it'd solve my problems, guess not. Firstly i tried to set it up on the outside of the hanger, but the tensioner doesnt go far enough in to get anywhere near the rear 14t cog. If i move the cog so that it is inline with the tensioner , then both the tensioner and rear cog are majorly out of line with the front (obvious problems). So then i tried to mount it on the inside, yeah i could get it in line but when i put wheen on everything rubbed off the spacers and the wheel didnt wanna move. Getting despaterate now, have even been thinking of getting rid of this curse and going 20", but i'll prolly even get problems with them! Help !?
  7. I have the same problem with mine atm also mate. When i put power into my left crank stroking down, i feel a clunk and hear it too, feels aweful, nothing loose from what i can see either. middleburns square taper btw. Ive just been riding reguardless
  8. The video dont work past the belgian dude for me either
  9. Sorry mate didnt like that one much.
  10. Proper good video, well done. The part where your bars came off your mod was insane! if that even happened
  11. I really actually felt sorry for him. I still couldn't help laughing though
  12. good video, but its mostly old footage compiled together mate
  13. Thought i saw a bit of belaey in that frame
×
×
  • Create New...