Jamie mcdonald

I have just bought and inspired fourplay and within a week the front end is creaking I have creased the bars and stem bolts wondering if it could be anything else. before I take apart the headset.

I have just replaced my chain on my trials bike and I've realized that the free wheel has a bit of play it's a trial tech 72 engagement one should I be concerned. It's only about half a mm.

Thanks I will try this I think it only realy happened because of how much pressure it gets put on it with trials.

I have had a creak in my front end for ages and I cant stand it anymore. It's not the bar or stem so I'm thinking it's either my headset or wheel. Has anyone had the same problem. Thanks jamie

I just installed some new 9.p magura pads on my trials bike there not bedded in yet. But when I back hop every so often the brake makes a squeak. I cant tell if it's the caliper or the rotor moving or the brake pads because it makes a noise like something is loose.

Ok thanks for the guidence.

I would lower your seat or even switch back to the metal one it came with because you don't want to hit your seat every time you bunny hop.

Hi I'm Jamie I've been riding street trials for 9 months and I kept braking parts on my bike and came across trials forum when searching about problems I was having.

You definitely can learn trials on an expensive bike But trials is a thing that takes alot of time to learn and theres no point of spending 2k on a bike that you might not use or might not enjoy riding.

I recently put some new cranks brothers stamp 2s on my trials bike and they were tight for a week of riding or so and it's almost like they just loosened in an hour today. I've tighten them back up now but I just found it unusual how they just loosened today. After a week of staying tight.

Ok thanks

I recently have bought a sram dub cranks set With the inspired bash. I had a bike shop instal it and it turns out they have not put any spacers in.Allowing it to shift backs and forth.Sram recommends a 4.5mm spacers for my frame size But the bb only came with a 2.5mm spacer and if I were to install that it would remove play but the preloader will be pretty far out. I just dont know If it would work well and not damage my new cranks and bb.