dezmtber

Halfords have got 4L engine oil at £10 bargain gets your service done best part of £13 cheaper

just turned 29 all the 24" bike i have tryed just feel way too big.

i had a quick go the other day. these brakes are soo bloody sharp, even sharper than my hope trial zones. i cant wait to see how well the hold up to comp use

its a 24" to fit a 12 year old basicly thats why you lot are sooo confused

Can't wait to see it finished today

22t front cog. Not 18.

24c" wheels 372mm chainstay, tensile long tensioner, 22t ring with 170mm cranks.

I am planning running a sprung tensioner on a 2 gear setup. 15t and 12t for comuting and 16t with 15t for comps. Will it work as in will the tensioner have the adjustment to change between those cogs without changing the chain length ? Or should I take cleric's advice and hit it with a hammer

Take the wheels and brake pads out then spray the bike sms parts, not wheels n pads. With silicon spray its good for hydralic seals aswell

UD stands for carbon made up of carbon sheets with the threads layer in a single direction. Where as older carbon methods used the carbon weaved sheets. The new UD carbon has less resin between the carbon material making it much stronger. And carbon holds its strength in the direction which it is layed much like trees take a slice from a tree trunk try to snap it against the grain and its very strong but go along It its very weak.

It will be done next week

It's massive and amazing, and you don't know what it is mwahahaha

Hollow pins and links too. I have a new one in my spares waiting to fit it as the old one hasent streched much yet

Just get the whole frame built by jaf. Costs the same as the echo anyhow

I have had the white tensile it broke. Althogh the 60 click has been sound for months

The kmc 710 al comes with a special split link that is the same with as the rest of it. I have been using it since febuary

Jaf bikes have been busy today . Finishing gussets to go on monday.

good work there i am thinking of doing a simlilar thing in febuary when its been a full year from starting out. some good use of the editing software too

It's higher than a ozzy osbourbe

Rear stay fitted

Few more pics here and my new wheel

I am massivly jealous of the frame

http://sheldonbrown.com/wheelbuild.html Loads of info here read this and give it go Youl be a pro wheel builder if you can take all this in

Check the diameter of you axle if its the same as the I think 22mm fly cranks then so long as there mid not Spanish bb it could work? I would be easier to get the right bearing from tartys though

Good riding the title had me confused. Is that a foreign spelling of December?