dezmtber

its definitly a monty. i remember them. i dont know the geo but i would say by what i remember they were very simmilar to the orginal onza t-mag

i play cod

http://youtu.be/nkwwR52E0V4

just a quick clip of riding at the roaches this sunday

this is how i normally ride on the bike. it does get a bit more hammer riding street http://youtu.be/INXHZAPdaK4

http://youtu.be/INXHZAPdaK4

a little vid of todays riding [media=]

the new 2013 saints look even better imo deffinitly get them

i am off out now see u there if anyone comes

small inacuracies in the fitment of the crank and freewheel cause this i some occasions bent axles on either the hub or cranks also make this happen its realy common on square taper bottom brackets

i will be there still tmz if anyone has a day free to ride

i will be riding the roaches near leek this thursday if anyone wants to come too. drop me a pm

hers a map to where i found these lovely rocks http://maps.google.co.uk/maps?q=53.41432,-2.968202&hl=en&sll=53.414347,-2.968307&sspn=0.001114,0.002401&t=h&z=16

my rockman austin (mod) 6 months in and still strong, touch wood i used to break stuff all the time saint cranks axle snapped rockshox pikes snapped. but no rockman snapped yet to see?

i rode there the other day the docks is lots of fun and there is also some good natural rocks in rupert park, everton. up the a59

hawyes organises stuff like mountain mayhem xc 24 hour races and does work for fisher outdoor (sram ect...)

what about the austin has anyone snapped one? the red one

that stuff i said i abou 4-5 qiud for a can that will last months heres a link for you all http://www.ebay.co.uk/itm/SILVER-HOOK-ELECTRICAL-CONTACT-CLEANER-500ml-SGEC1A-/320892803474?pt=UK_Car_Accessories_Car_Care_Cleaning&hash=item4ab6b39992

the best stuff to use is isopropanol alcohol. you can get this from any car part shop, its labeled as electrical contact cleaner. it leaves no residue (oil) at all. ( meths car brake cleaner does have some oil in it) clean pads with the same stuff. and use some wet and dry on the pads too. to check if your pads are properly fubar put the wet and dry on a flat surface and gently rub the top surface of the pads on the wet and dry leave the pads a few minuites if you se the dry dusty surface go dark it indicates there is still some dampness in the pad material if you see this buy new pads they are fubar. finaly rub the disc with wet and dry on the braking surface to allow the disc to gring a the pad flat and even to the disc. if this all fails get the bike to a good bike shop.

i coundn't be arsed checking how many clicks it was i know its around 68 ish everyone knew which one i was on about i second the fact that the pawls are cheaply forged for tensiles i see hope paws daily and they just look 5 times better quality has anyone ever thought of grinding a sharp edge onto tensile pawls to meke them work better, while you take the greace out befor the 1st ride?

could you make some sence of what "mother of god" means to an old man?

i found it if you click view new content then look left and at the bottom of the option list there is filter by forum you can check the ones you are intrested in it just took 6 pages down to 3 pages by just ridding of the classifieds

i have had 96 click tensiles go just as quick two of them also. i wouldn't be quick recomend this free wheel untill i hear there is a revised version on the market. i now run the tensile 68 click and it is spot on never missed a beat, i really trust them with my life.

i just wanna see whats going on. but everytime i check new topics its just completly full of for sale adds is there a way that i can stop the for sale section coming up on new topics

hope it doesnt rain, whats the weather like in liverpool?