flower

Now find some figures for cannabis related crimes and the compare them to alcohol related crimes. And dont forget lil man alcohol is a drug.

Can i ask why you wanted a wider rim? I know you wanted a wider rim but would you sacfafice strength over width. It is a known fact that Mavic are the best wheel producers, and when i changed to a wider rim it made my bike look bad ass. But the only difference was that the wider rim dented and i found myself every 5mins looking at my rim thinking, "shit is it f**ked". I would personally buy a d521 as in the picutre. And if more people had frames which could fit a D521 i highly believe many of them would go back to one. It was designed, built, and dispatched straight from gods of an ancient time, long ago, in a far away land, it is the D521 Be wise by a 521. If not good luck.

Are you a total idiot? Try reading the above posts

email LEON on the forum he was selling one for about £100 looked mint. It was the jamacian one.

no it wont work. If you used a old school c2 leaver then yes, because it runs on a closed system unlike the trial which works on an open pot system. (i may have the 2 mixed up) but thats irrelevent it wont work, well to a trials standard anyway. It will be like the ultimate spungy mess.

what bb is it?

Oh i see m8 sorry. Dosnt look all that but if it stops you and is more powerfull then nice job. Most people say go and buy one. But it takes a bit of savvy to actually do it. Nice one.

lol f**king legend

I'm confused are u trying to say you have made your own disk and pads but the pads don't stick to the backings? or that you need some assistance or is it something irrelevant that you put up due to boredom.?

or go in write ur name and walk out. thats wat my m8 did. But ur call..

lol classic

And i bet after u hit him he would make u look "like a right little girl" .

Smash every joint in the body with a hammer and bolster. Start with the toes, then up and up and up until you get to the head. then using a 25mm wood bit start drilling in there ear dum and push Very hard on hammer mode. Then watch and wait for the blood to drain. Then for giggles place 26" large 3 inch thick innertube (kenda downhill) then contect to a compresser (or hand pump what ever you wish). Push inertude into anas all the way in and leave the valve out the ass. Conect the pump and voi la, we have more blood and shit.

1. iv just brought the car some i'm not gunna sell it. 2. i like it 3. the reason i need new wheels is that the car is a hazard. It has not traction what so ever thats why i want new wheels, its mainly the width i need as mine are like a rizzla thickness = HAZARD. (and before you ask the tiers are fine) 4. Granted it is french but f**k it at least its not german!!! 5. I think i will ignore most comments as they were about as useful as a latex glove full of spunk. I think Raped comes to mind.

good call, any ideas, i need to buy summing so badly

well basicly iv got £650-£700 to spend on 4 wheels and tyers for my car. Now it dosnt have to be all spent but im not fused. Its my first car so i really know wats out there. I really like the look of OZ but wolfrace have it also. Im looking for either a ti finish or black. Preferbly spoked not a solid face. If anyone has any nice wheels in mind oh my cars black by the way please inform moi.

I ws doing 20mph if not less i was in traffic but i got it sorted thankfully only £60 through the insurence wat a result

Yeah after something hit it thus causing a week point over the window its self, and the wind acting as a hammer effectivly pushed the shatterd glass out. But i dont know so. but if uv ever thrown a brick at a glass panal it does that spiders web effect then the wind would blow through that. But the noise was when the glass went out of the window.

Well thats wat i said but if the "object" wasnt big enough to smash it but to crack it then the force created by the wind blowing through may hav caused it to blow through. It only needs a week point. But im confused.

No not at the moment its all im my garage as the amp was faulty when i bourght it. Its the standard stereo which is nothing to shout about really.

right i need some informative advise none of this is sorry about your window thats harsh ect, bull shit. Right picture this scene. I'm driving along southend sea front with 2 of my mates. Going along at a steady pace and then disaster struck...............BANG!!!!!! I looked round and i had a f**king huge hole in my back window and the whole thing had shattered. I stopped instantly and look about for some ignorant twats to savage. But alas there was no one to be scene. Pretty much all the glass was out side the car not in the boot. And the remaining glass was bulging outwards. This is the confusing part you see. My dad said that someone must have thrown something and it shattered the window but kept it whole but as the windows were open it acted like a gun a blasted a whole through it. But i have hurd on a tv programme AGES ago that a certain car and model had this problem, but it was the pressure from within the car causing it to go BOOM. IF anyone has any advice similar experiences please let me know as i curious and f**king pissed off. Iv been driving a week and i also go to lash out cash for a service on wednesday. ps. Oh its 1.1 saxo forte Cheers Flower

I yeah i recently destroyed my mech and hanger, iv got a nerw rear much sorted, however i do needthe hanger still. Iv got a koxx levelboss 1065, the old style (well 3 years old) and i desperatly need the hanger. Does anyone know where i can purchase a NEW one`!!!!!!!!!!!!! please help. Im begging!!!!!!!!!!!!!!

Come on people, you know you want to come. Think a week riding and drinking!!!!!!!!!!!!!!!!!!!!!!!!!!!

I think il do that cheers, some of those replys seemed, well weird. Cheers anyway but if anyone knows how to make the chain stay in line without spokes, bolts, tapping or other weird shit, please say. Thaks for the quick replys people. Thanks

well basicly i cant run a cable in my rear mech any more due to the barral adjuster being smashed so iv moved the hi and low screws to there optimum place, but the chain line is still off a tad. Would a quick CHEAP and easy method to cut the main spring. Then it would float in its best position, or am i being stupid? help please.