narrowbars

Rotor make alloy spacers in 2 sizes 5.5mm and 8.5mm, see here - http://velotechservices.co.uk/shop/vprod4.asp?cat=7386000657&PageOrder=0&PagNo=1&ipp=9999 I would use a combo of them for the spacing of your cranks and chain ring/line, and have the bb threaded fully into the frame or 1 spacer each side if it was me. Looking at the picture of your left hand (non-driveside) bb cup, you really can't have much thread contact holding that in? For the alloy pre-load ring contact http://www.silverfish-uk.com/

I personally would buy an Alloy pre-load adjuster when available, use x1 spacer each side of the bottom bracket cups and use alloy BB30 axle spacers to adjust chainline/excess. The more thread contact holding your bottom bracket cups into the frame the safer http://www.wiggle.co.uk/race-face-next-sl-cinch-crank-arm-bearing-pre-loader/

First and only video I've seen this year that makes me wish I still rode, such a good style. Who's the music?

So myself and Doug were paired for the video comp and this is what we came up with. Doug emailed me his clips and I've put them together in a basic edit. Fairly pleased with it considering the circumstances. Enjoy Added a Vimeo link as Youtube was blocking the video on mobiles due to copyright on the music

Filmed mainly in 2004, can't believe this was practically 10 years ago

Fairly sure there wasn't an official video. Seen the odd clips on Youtube and Vimeo but nothing much

Running 18-14t could you not just file the dropout to allow the wheel to go a bit further forward?

Entered

Ran mine 18-14t without any issues. Same chain as well 610hx

I used one called Splice a while back. Pretty basic features etc but does the job

Do you already have the hub? Pretty easy to measure if yourself. http://leonard.io/edd/howtomeasure

Zhao Xuan :bow:

Those of you on my Facebook friends list will have probably already seen these clips, so don't expect anything new. I put them together last night quickly with some music and bit of basic editing etc. Hopefully you'll still enjoy it, even if you've seen the clips before

Enjoyed that Dave, just a shame the filming doesn't match the quality of the riding.

Nice, but preferred you Limey. You coming to the Tunnel Halloween ride?

Was quite pleased when I got these line, then watching it back on film and was a bit meh https://www.facebook.com/photo.php?v=10153357468615274

Very nice Jack

45 seconds from Portland today https://www.facebook.com/photo.php?v=10153300999025274&set=vb.566040273&type=2&theater

No opinion on the Trialtech one but my Reset Ti bb lasted about 8 months and I'm hardly a basher. I certainly wouldn't use another ti bb for the sake of 40-60 grams.

Footage http://www.sporza.be/cm/sporza/videozone/sporten/wielrennen/MV_130929_WB_Trial_uitgebreid_verslag