weebryan

looking for any vids that have touch hops on a mod need some help with height

Go to www.koxx.es you can skip the intro down on the right hand side and go into the videos and images if you want to see it on full screen http://www.koxx.es/

Yea well he did finish 3 in the worlds so hes not to shabby, i think he trains alot with benito ros and other big spanish names comas? Another vid

Carles Diaz showing the new model video pics

no thanks i ride a xtp 20" now and i need money sorry

yea i have got a frame lying (not sold yet) that i used for a while old school geo but rides really nice and light got the pics when it was built down on the link below as my sig. first review

Ahhhh!!! Finally got to go out on my bike after a week of bad weather and done two hops went over the bars and my axle snapped and some how found all the bits so ......... i am looking for a new one. Do you know any where that sells them?

What i done was remove the lever and get a pair of pliers/vice grips and turn the adjuster to the + way until the pin comes out and if possible get a tap and die and clean up the threads or remove the adjuster and run it up and down the pin a few times and put back together with grease and it wont seize. If you ever get a new one grease it first or do what i did and get a metal one it is then harder for the threads to mess up instead of plastic

Sorry but both links are not working for me

Is there any way to get them out and service?. I have a few sets seized in the garage or will not return even tried lubbing them

yea wash the rim and allow to dry by holding the bike from the front , locking the brake and push the bike backwards against the brake, you can get more force this way and allows the pad to brake in

Koxx yellows are made for wet muddy conditions if you want a grabby brake but less lock go for something sof tie zoo along those lines and for a good lock not grabby use a hard compound koxx browns but if u want a middle use koxx green/blue its really a trial and error thing what type of grind/rim and pads just experiment until your comertable.

Heres what i did when i had a ta26, file/buff a small bit off the old style maggie booster and use a v brake booster(tektro the one i used or similar ) for the bottom bolts just like a 4 bolt booster pic of boosters

I done that only i cut the tip off my finger off and jammed my brake up which i spent ages trying to stop it rubbing eventually got the skin out of the brake and was drag free so it was worth it

Not really i am using them the now it will wear very slowly as there are a medium pad the pads also wear very slowly to good pads.

I have noticed varies styles through the years i always thought trials bikes were designed for a bike to go over a obstical without putting your feet down i.e like motorbike trials but now there is street style which includes spins manuals and other tricks which i always thought was a bmx thing? . I hope the sport dosent progress for showing of purposes and keeps it to its roots i.e what the bikes were designed for, anyways was wondering what the majority of the T-F think is the street style going too far?

Are theses the ones u are intersted in cause i am aswell pics

I used wd40 to clean it then used the 3 in 1 house oil which is thin enough last for ages

I have bother with my wrists i found out that i lie on them bent when i am sleeping and in the morning i cant lift a cup of coffee so got myself a power ball and work really well i am surprised. I was also using try-all flay bars which have a high sweep and swapped the for the replicas which are much flatter and found this really helped alit also use wrist supports out of tesco and now i hardly have bother with them so i can go back out

What other re-fills can you get for the cnc backings i only saw the red ones on the site

Hey, was wondering what you your opinion was on the new cnc brake lever from adamant/zoo/czar, the fresh product for the new lever for the 04 and the rb design lever or any other, compared to the standard magura's. I am thinking of upgrading but not sure what to get, now runnng 05 hs33 and was thinking of going back to the 04 and getting a fresh product but is it worth buying a new 04 body£30 and new lever blade £28 or £25 for a cnc one?

Thanks felix

Is the pads in the hope/try-all the same as the hope mono trials i need to get some new ones?

Get a power ball done wonders for my arms i had problems with my wrists and now sorted

I had one for about 6 months and i found that they were really slippy in the wet and thin side walls but were good for summer and very light weight