Lei ke si Posted April 21, 2010 Report Share Posted April 21, 2010 Can any want help my hope mono Master cylider cap the 2 small bolt have rounder..need some tip to take out.. Quote Link to comment Share on other sites More sharing options...
lukeanderson31 Posted April 21, 2010 Report Share Posted April 21, 2010 Can any want help my hope mono Master cylider cap the 2 small bolt have rounder..need some tip to take out.. most people use a hacksaw or a dremel and cut a groove in the head so that a flat ended screwdriver can be used. After this however, i would definately replace the bolts with new ones hope this helps Quote Link to comment Share on other sites More sharing options...
JD™ Posted April 21, 2010 Report Share Posted April 21, 2010 Sometimes cheap allen keys are perfect for this - use the one the next size up and clout it into the rounded hole. The cheap allen keys are generally a bit softer so you'll get the bolt out. I'd say only do it if you can't do the method above though Quote Link to comment Share on other sites More sharing options...
monkeyseemonkeydo Posted April 21, 2010 Report Share Posted April 21, 2010 If they're the caphead type I've managed before (on a Hope cap as well...) with a set of pliers gripping the screw head but it depends what style of screws are in there. Quote Link to comment Share on other sites More sharing options...
Lei ke si Posted April 21, 2010 Author Report Share Posted April 21, 2010 I still can not take out..the bolt is more rounder now.what to do?? Quote Link to comment Share on other sites More sharing options...
Lei ke si Posted April 21, 2010 Author Report Share Posted April 21, 2010 Oh I have take out..thanks for everyone help..I have one more thing to ask when I put back to cap after bleed there is a small hole when I press the lever it lid.. Quote Link to comment Share on other sites More sharing options...
monkeyseemonkeydo Posted April 21, 2010 Report Share Posted April 21, 2010 Yeah, that's just a little 'breather' hole to allow air in as the pads wear down and the reservoir fluid is used up. After a fresh bleed you usually get a little bit of fluid spitting out of the hole when you pull the lever. It should reduce with time but it's nothing to worry about . Quote Link to comment Share on other sites More sharing options...
Lei ke si Posted April 22, 2010 Author Report Share Posted April 22, 2010 Thanks.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.