Mod Job Posted June 27, 2012 Report Share Posted June 27, 2012 Been having problems with bleeding my hope tech trial brake, I've followed the official guide but am still experiencing a slightly spongey lever feel. Does anybody know about the "quick bleed port"?I cant find any info on it or methods of how to use it. Any help would be much appricated Quote Link to comment Share on other sites More sharing options...
ezgonzo Posted June 27, 2012 Report Share Posted June 27, 2012 (edited) I'm running a tech on the front of my fourplay, i've only ever bleed it the good old fashoined way, never needed to use the quick bleed screw as it's always bleed fine, i have noticed though that the tech does'nt quite have the same solid feel that the mono's did, but it still has a nice feel have you made doubly sure that the pads are perfectly central and that the caliper/pads are also 100% in line with the disk, even being slightly on the piss will lead to a spongy brake Edited June 27, 2012 by ezgonzo Quote Link to comment Share on other sites More sharing options...
bike_dummie Posted June 27, 2012 Report Share Posted June 27, 2012 lazy piston? Mine felt very spongy until i sorted it out now my brake feels solid. Quote Link to comment Share on other sites More sharing options...
Jake. Posted June 27, 2012 Report Share Posted June 27, 2012 My hope tech 2 brake doesn't seem to bite/hold with an avid disc, any idea which brake pads are best to use? Quote Link to comment Share on other sites More sharing options...
trialsiain Posted June 27, 2012 Report Share Posted June 27, 2012 my hope tech x2 is very spongy even adjusted it still hits my finger Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.