Mark W Posted September 7, 2012 Report Share Posted September 7, 2012 Stan Titanium is a new brand to the UK, specialising in lightweight ti upgrade bolts and fittings. They manufacture the usual range of M5/M6 bolts: However, they also make barbed fittings/shroud nuts for Magura (and some Echo) brakes: They also supply HS33 lever pivot bolts for '04/'05 levers: As well as lever pivot bolts for the Hope Mini lever: For people running V-Brakes they make two sizes of V-Brake Studs: As well as other items such as pedal cage bolts and pedal axles (for Wellgo MG-1 based pedals, Echo TR Caged pedals and Try-All Superlight pedals): Rotor bolts: And finishing kit such as a range of sizes of headset spacer and some pretty sweet M15 ISIS crank bolts: 1 Quote Link to comment Share on other sites More sharing options...
isitafox Posted September 10, 2012 Report Share Posted September 10, 2012 Loving the V brake posts, crank bolts and pedal axles though the latter scare me slightly. Quote Link to comment Share on other sites More sharing options...
Nick Manning Posted September 10, 2012 Report Share Posted September 10, 2012 They do look very smart. Stan titanium a new brand to the UK, is Stan Shaw behind this? Quote Link to comment Share on other sites More sharing options...
N.Wood Posted September 10, 2012 Report Share Posted September 10, 2012 Do those headset spacers say 'stan' anywhere on them? Thanks. Quote Link to comment Share on other sites More sharing options...
JD™ Posted September 10, 2012 Report Share Posted September 10, 2012 How pimp? Very. I'll almost certainly never buy any, but it'd be cool to see a bike fully tricked out with the whole set. 2 Quote Link to comment Share on other sites More sharing options...
isitafox Posted September 10, 2012 Report Share Posted September 10, 2012 Be similar to this wouldn't it http://www.trials-forum.co.uk/topic/173085-breath-26-bike/page__hl__%20titanium%20%20magura Quote Link to comment Share on other sites More sharing options...
JD™ Posted September 10, 2012 Report Share Posted September 10, 2012 I can't remember the last time I saw a 'proper' trials bike and thought it looked decent - that one still hasn't changed that. I'm feeling this set on an otherwise stealthed up street 24 personally... Quote Link to comment Share on other sites More sharing options...
Mark W Posted September 10, 2012 Author Report Share Posted September 10, 2012 Do those headset spacers say 'stan' anywhere on them? Thanks. Stan's do where he wrote his name on them. 2 Quote Link to comment Share on other sites More sharing options...
N.Wood Posted September 10, 2012 Report Share Posted September 10, 2012 Good! I like the parts, but the 'stan' logo isn't... er, to my tastes. Is Stan (the brand) Russian? Chinese? Quote Link to comment Share on other sites More sharing options...
Mark W Posted September 10, 2012 Author Report Share Posted September 10, 2012 Chinese I guess on the plus side, the logos are going to be covered up pretty well on most of their products Quote Link to comment Share on other sites More sharing options...
SamKidney Posted September 10, 2012 Report Share Posted September 10, 2012 I'd LOVE to get my Echo 24" tricked out with all this kit. One day, one day.. Quote Link to comment Share on other sites More sharing options...
Miss-Higgy Posted September 10, 2012 Report Share Posted September 10, 2012 Here's a question, since cap uses a front magura set-up, like a less smooth costellier. Is someone needed who uses their front brake excessively to test some rotor bolt's. Jim's a fine candidate for it! Quote Link to comment Share on other sites More sharing options...
AndrewEH1 Posted September 10, 2012 Report Share Posted September 10, 2012 Look good but I'll be sticking with TiBolts, although they don't do all of those trial specific bolts. Quote Link to comment Share on other sites More sharing options...
Blake Posted September 11, 2012 Report Share Posted September 11, 2012 gunna be about £130 to replace all my stuff with their ti counterparts, wowchers. think the only ones I really want are the crank bolts cus they just look the shit and aren't THAT expensive if i'm honest. Quote Link to comment Share on other sites More sharing options...
Mark W Posted September 12, 2012 Author Report Share Posted September 12, 2012 All I'm saying is - '05 Magura with 4-finger blade, metal TPA wheel, Trialtech splitter, Pro-Bolt blanking bolts and a bunch of Ti fittings would be the boy. Quote Link to comment Share on other sites More sharing options...
isitafox Posted September 12, 2012 Report Share Posted September 12, 2012 All I'm saying is - '05 Magura with 4-finger blade, metal TPA wheel, Trialtech splitter, Pro-Bolt blanking bolts and a bunch of Ti fittings would be the boy. Hmmmmm, I need a splitter and 4 finger lever blade for my mod............ Quote Link to comment Share on other sites More sharing options...
isitafox Posted September 12, 2012 Report Share Posted September 12, 2012 Might have to hang on a week or so though Quote Link to comment Share on other sites More sharing options...
Mark W Posted September 12, 2012 Author Report Share Posted September 12, 2012 I'd actually forgotten about the lever bolt. I suck... 1 Quote Link to comment Share on other sites More sharing options...
Ross McArthur Posted September 12, 2012 Report Share Posted September 12, 2012 And the water bleed Quote Link to comment Share on other sites More sharing options...
Mark W Posted September 12, 2012 Author Report Share Posted September 12, 2012 But that goes without saying Quote Link to comment Share on other sites More sharing options...
eskimo Posted September 12, 2012 Report Share Posted September 12, 2012 M15 cranks bolts would of been a nice touch for the people who prefer style over weight Maybe i could purchase them vee boss' for my Mod too and run it brakeless to show them off Still, i would seriously buy some M15s. Quote Link to comment Share on other sites More sharing options...
Luke Rainbird Posted September 12, 2012 Report Share Posted September 12, 2012 some pretty sweet M15 ISIS crank bolts: M15 cranks bolts would of been a nice touch for the people who prefer style over weight Maybe i could purchase them vee boss' for my Mod too and run it brakeless to show them off Still, i would seriously buy some M15s. Whut? Quote Link to comment Share on other sites More sharing options...
SamKidney Posted September 12, 2012 Report Share Posted September 12, 2012 The more I look at these bolts/fittings the more I have to have them! Quote Link to comment Share on other sites More sharing options...
Andeee Posted September 13, 2012 Report Share Posted September 13, 2012 (edited) Noice! Would be interesting to see a bike with normal steel bolts and weigh it then do an after with stan bolts etc. Just to see if there is a difference in weight. Id need a mortgage to afford a full ti set :/ Edited September 13, 2012 by Andeee Quote Link to comment Share on other sites More sharing options...
aener Posted September 13, 2012 Report Share Posted September 13, 2012 If? You want to put heavier bolts on a bike, weigh it, then put lighter bolts on the same bike and weigh it, to see IF there's a weight difference? Christ. 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.