HippY Posted July 7, 2014 Report Share Posted July 7, 2014 (edited) Hey guys My Archenemy, the brake is back I got a BB7 from Ross McArthur, and I put it up, and pulled back both pistons fully back... and the right (wheel side) piston rubs... most interesting fact: it happened with the previous brake too... So here are some options what could happen: the mount of my trialtech fork is too left/ the adapter is not fat enough B the disc is on too right as I cannot to anything with the fork/adapter( no proper sized spacers) I can space the disc so it will stick it to the left a little. The question: should I? C: I am retarded and I should set it with the post mount? After 2 minute, the answer is C............ Edited July 7, 2014 by HippY Quote Link to comment Share on other sites More sharing options...
AlexClare94 Posted July 7, 2014 Report Share Posted July 7, 2014 If you set up as post mount you'll need a bigger rotor won't you? Quote Link to comment Share on other sites More sharing options...
HippY Posted July 7, 2014 Author Report Share Posted July 7, 2014 I have a IS to PM adapter, with a +0 ( 160 mm) adapter. so I do not need to change to bigger disc, as 180 is enough for now ( pro tip: my fork is +20) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.