Jump to content

Cannondale steerer tube


fatty r
 Share

Recommended Posts

Hi so I have a pair of cannondale ultra forks with head shock I was wondering if it’s possible to press out the steerer tube and press in a standard 1 1/8 steerer. Here’s how it is currently any thoughts?

B9BD36E3-FF80-48E4-BD5C-2652498A16E3.jpeg

1B652A16-5C18-4E3A-A6ED-A317E0A2E1CF.jpeg

Link to comment
Share on other sites

So I had a look and compared them to a some fattys. Neither appear to be welded the fattys are drilled and pinned with hollow pins in the yoke and when you look in there is a line where the bottom of the steerer tube and the fork yoke meet. Actually would they be able to weld the steel steerer to ally forks? When looking and getting the verniers out the hole in the fork yoke on the fattys was 26mm and on the ultras it was 28mm so if it can be done the new steerer would need to be flaired out at the bottom to suit. Or an aluminium one machined. Or would a steel one with a knurled end be an option 

hopefully these photos are clear enough to see what I mean 

B94318AF-5D22-4386-B9F7-EE710DA5CBC0.jpeg

8EFDDE1E-69BD-463A-BD34-E3860F7430B7.jpeg

B05FFF4B-A9B6-482D-984A-28F09C100436.jpeg

4FE44521-D700-4FD4-A3D1-DC9306D0A348.jpeg

A4681A78-04E7-4144-B15C-A9C8107FA95C.jpeg

FC7AD251-73F2-4C15-B61E-BDC202BC8D52.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...