Jump to content

Cleaning A Hub


Chris Elson

Recommended Posts

Right, i'll presume you know how to crack that little hoare apart.

If not, it's on the Hope website and plastered all over this forum with a search (Y)

Once it's apart, lay all the pawls and springs on a bit of cloth and make sure they're safe.

With WD40/GT85 in hand, blast all the shite from the pawls/springs/ratchet ring.

Clean them up with the cloth and use a degreaser to clean them all up shiny if you like.

Then get some chain lube (Tri-Flow or similar) and squirt a little onto the ratchet ring and spread around.

You can use a small dollop of grease on either end of the 3 springs to help them seat to the pawl/ratchet body correctly.

Reassemble and you're done.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...