Pluc

Hi, The others shoes, Try-all or Ribo, the sole is hard also? In videos, the riders using seem to be soft and grip. Thanks.

Hi, I get a V!Z trials shoes, but I found the sole very hard and smooth. This is normal? I used an old shoes and I had much more grip in pedal. Thanks.

Hi, I'm thinking to get one. If has, which the advantages of the brake Echo? Thanks.

Hi, Thanks ABTRIALS1! Somebody more has an opinion? It can be on other frames built with booster.

Hi, I want to get the frame czar freetrials, but I'm in doubt in the brake. I prefer v-brake, but I have doubt if the adaptors will work well. I think about Heatsink V2. I'll need to use booster additional in the frame that already was built with booster? Thanks.

Hi, I'm thinking get setup of Echo front screw sprocket and bashring in Adamant CNC cranks. It has some risk of the sprocket to free screw in back tricks? Thanks.

Hi, What you thinks about this? I use v-brakes and do many front hops. http://www.chainreactioncycles.com/Models.aspx?ModelID=618 http://www.chainreactioncycles.com/Models.aspx?ModelID=350 Thanks.

Hi, What they think of Sun Rhyno Lite rim in rear for trials? "ABT - Advanced Brake Track", this turns brake great? I use v-brakes Avid Ultimate with Kool Stop pads in smooth rims. Some times use sandpaper to increase the tack of the pads. Thanks.

Hi, When I turn the free-wheel happens the click (sound), but to engagement it has to come back a little the turn... to this delay that I mention. Other question: I read in some place that has some problem with the original bolts, what it is? Thanks.

Hi, I bought the hub for trial (picture) who I still didn't install, but I could verify that he has a small delay between click (sound) and the engagement of free-wheel. This is normal? Thanks

Hi, I'm wanting to get a rear hub Chris King Classic with original axle and aluminum freehub, but I have some questions: - This setup works well for biketrial and street mix? - It is need to use some specific cassette? I think about using a Shimano Sora. - What lubricants is indicated for maintenance? Riding only in dry, what the period recommended for this? My preference is for a Hope Pro II Trial, but in my country it does not have and to matter is complicated. Thanks!

Hi, Still I didn't talk with the mechanic... I'm waiting to arrive the aluminum. When will be ready, I post a photo and say how much it cost. Thanks!

Hi, This is a doubt... Then I think leaving with 12,7mm because this is the original thickness of the plate. Thanks!

Hi, I don't go to pierce the part, will remove 7mm of material. Thanks.

Hi, What think this project? Will be made with aluminum 6101/T6 with thickness of 10mm. Measures in millimeters. Thanks.

Hi, I not want to know if fit for 4-bolt, I use v-brakes and would use for this. Now that it said that are bad, I not get. Thanks...

Hi, I want get one of these. Then will make a good work? Thanks to all!

Hi, What think of this part? Thanks! http://www.chainreactioncycles.com/Models.aspx?ModelID=8215

Hi, The model that I intend to get is of first post. Thanks!!!

Hi, I made what it indicated, however after some time, the pads come back work different. It has some way to correct this? Thanks.

Hi, Which rub is equivalent to this? DT, King, echo or others? Thanks!

Hi, What they think of this hub? It can be used with cassette? Thanks!

Hi, Echo pinks has the same compound of red pads? Thanks!

Hi, Echo or Kool Stop is the available pads for the purchase in my country, i want know which of it is better in the smooth edge without tar. These pads make much noise? Thanks!

Hi, Echo pads makes much noise when lock? Thanks!