Jump to content

Mee(ukkraine)

Members
  • Posts

    52
  • Joined

  • Last visited

Posts posted by Mee(ukkraine)

  1. I think that in that place a srtongly tight spoke/es. Try to remove this tight. If the problem persists, take this - 15505..11m.jpg and straighten out a little sidewalls in that place. Sorry for bad English, but I hope you understand me :$

  2. So start ... :) I ride a try all cranks long time, not so long ago, I crack the left crank. I decided to buy midleburn. I'm buy from tarty midleburns and 18T bashring. All came! When I took in hands, I was pleasantly surprised by the quality of both products. BUT!!!:rant: Bashring not sat on the cranks!!!:rant: I had to deal with hour by adjusting the splines on bashring. When I started working with rasp, the coating begins sliver. Quality of steel or hardening leaves much to be desired, it is very easy to rasp.

    Here is photo with rasped splines and slivered coating:

    img1423o.th.jpg

    img1425.th.jpg

    Okay, with that clear ... Bashring set to cranks! Go ride!!!!:bigthumb:

    I have already talked about the softness of the steel.

    Here is the cog after 10 hours of riding:

    img1427z.th.jpg

    img1426u.th.jpg

    Dear TNN, so it should not be? Really?

    On the third day of riding happens another ugly thing! I jumping sidehop to corner, my front tyre slip and I'm hit the bashring. The wall was concrete and the hit was weak, but a couple of teeth bended:wtf: I'm use 118mm truvativ gigapipe sl bb. Bent teeth led to this:

    img1428s.th.jpg

    I believe that you are required to improve the quality of this product.

    Best regards. Michael.

  3. Frame - tucana '08 short

    Fork - koxx forxx with welded crack :(

    Bar - truvativ team 35mm rise, 680mm

    Stem - trialtech

    Brakes - HS33 with 4-finger lever blades, front with homemade pads, rear with koxx browns

    Front wheel - onza custom drilled, quando drilled hub, dt revolution, kenda blue groove folding stick-e tyre

    Rear wheel - RedForce rim single walled and custom drilled, chris SS, dt revolution, try all tyre

    Cranks - try all 175mm

    Pedals - mg-1

    Bb - truvativ gigapipe sl 118mm

    Bike weights 9.3kg

    h005nm4.jpg

    h011ws5.jpg

    h012uo5.jpg

    h013po7.jpg

    h014ky4.jpg

    h015em4.jpg

    h017gk6.jpg

    h018nf1.jpg

    h021ef4.jpg

    Hope you like!

    Michail

×
×
  • Create New...