Jump to content

Stevey

Members
  • Posts

    29
  • Joined

  • Last visited

Posts posted by Stevey

  1. Hi,

    I have a Truvativ Giga Pipe ISIS Bottom Bracket with M12 thread size. I need help because I need to buy a tap to re-cut the thread as the crank bolt (which thread is fine) won't catch onto the thread of the bottom bracket due to the start of the thread in the bottom bracket being damaged. I have looked for a while to try and find out the the pitch of the M12 thread. The only result I was able to find was, "M12 x 1.75mm". I am not sure if this is correct so I need help because my bike is un-rideable! :(

    Thanks, Stevey

  2. The caliper is very similar, but is forged rather than cnced like the Hope one, they do use the same size piston and seals though.

    That is what I was trying to say about the caliper because I need a new seal for it and someone suggested the Hope seals and then this debate about wether it would fit or not started. :) Now it is sorted that they will fit, I just hope that the seals will work. Cheers for helping! (Y)

  3. No it isn't :rolleyes:

    It has the same piston size and seal size and is based very closely on the Mono Trial caliper so it pretty much is the same inside but with a slightly different external appearance. :P

  4. The inner diameter is the same. Whether they will fit the caliper is a completely different matter. Tarty should know.

    I was woundering that so I have sent them an email to make sure but it should fit seen as they have the same caliper. I just hope that it work.

  5. it will work in this direction because mineral oil isn´t as agressive as DOT.It wouldn´t work the other direction though.

    Oh right cheers, I wasn't sure so I guess I will buy the Hope seal then because it is the same size.

    Thanks Stevey

  6. I wonder how well a hope caliper would work on an Echo Lever using Hope seals in the lever? If thats possible?

    I think that would be possible but it would cost a bit of money to get a new caliper and seals. I just want to replace the caliper piston seal but I don't know where to get a replacement.

    Stevey

×
×
  • Create New...