[Post A Video Of Todays Riding]

Clips that I filmed today while testing my new Because Simple 24" build

[Hope hose help]

Thanks for the help Adam, I will give it a try. Are the hope fittings reuseable?

And about the taxes, if I pay £10 on Tarty I will have to pay around £10 worth of taxes. =/

[Hope hose help]

There isn't any problem with Tartybikes, the problem is that I have to pay 100% if I buy from outside Brazil, so it would be better if I could find an option that is not Tarty. If I can't find any I will end up buy from Tarty.

How about hope fittings on shimano or avid hoses?

[Hope hose help]

So, I recently got a trialzone brake with tech levers, but the hose that came with the brake was too short. I have an echo disc brake hose and a would like to know if I can use it with the hope fittings and install it in the brake. If not I would like to know about a hose that would be compatible with a hope brake.

P.S: I live in Brazil, so I don't have direct access to original hope hoses.

Thanks, and sorry for the bad english

[V-brake set-up help]

I recently decided to try a V-brake in my front wheel, I ended up buying SD7 arms with heatsink blue vee pads. I'm using an echo urban fork in my bike and I'm having trouble setting up the brake. It seems that the spacing between the two arms is not big enought so I can't get the pads to hit the rim square.

Does anybody has any hints that can help me with this set up?

Thanks

[Avid Elixir 5 vs. BB7]

Which brake would perform better on the front of a 24" bike, an elixir 5 180mm or a BB7 180mm?

[Hope pro 2 help]

that video doesn't really show anything. . .that's just the space between the engagements.

But is the space usually this big?

I don't know because I've never used freehubs before, I've used just freewheels

[Hope pro 2 help]

I got an Inspired 4play recently and the rear hub feels a bit weird. It seems to have a lot of play, but I don't know if it's normal or not.

Can anybody help me??

[Chain tensioner help]

Does anybody runs spoke tensioners on the new Inspired without the need of a half link???

[Chain tensioner help]

It's my first bike with spring tenioner. The chain seems to be pretty slacky. Can I adjust the chain tension on spring tensioners? Any better tensionin solution for a 2013 w/ 22/16?

[Chain tensioner help]

I've recently got an inspired but I can't set up the chain tension properly. Any tips or tutorials on how to set the tension with a trialtech sport tensioner?

Thanks

[HEX vs 4play]

Will the HEX be too big for me? I'm 5'6"

[HEX vs 4play]

I'm planning to get a new bike, but I'm not sure of wich one to get. I can't decide between the 4play pro (1500 usd), HEX Team (1500 usd) or HEX Pro (1100 usd). I'm tempted to get the HEX, since it's cheaper, I'm 5'6", so wouldn't the HEX be too big for me?

Keep in mind that I used to ride a Marino with 4play geo, so I'm already adapted to the 4play geo.

Thanks and sorry for the bad english

[Marino Bike 2013 Team Rider Found & frame order discussion thread]

Any chance for a Brazilian rider?

[Getjudged]

How can you manual so easily? X-up manual are mental

[Echo Disc - No Hold]

TR rotors can take a good while to bed in, assuming there was no contaminants on the pads/disc when fitted. Just a case of time and patience, or get a hope rotor on there.

Should I bed it with water or without it?

[Echo Disc - No Hold]

Are you using the Echo TR disc?

Yep

[Echo Disc - No Hold]

I've just bought a new echo disc brake and some hope standard pads. I rode my bike for about two hours, and dind't manage to make the brake hold. Any ideas on what should I do?

Sorry for the bad english

[Inspired Fourplay With Temp Brake Setup]

What Echo caliper are you using to be able to run 180 mm discs?

[Inspired Fourplay With Temp Brake Setup]

Is there any hydraulic advantage of running shimano levers on echo callipers?

[Cable Through Forks Doubt]

The gusset starnut won't fit my steerer tube. I'll try removing a tab of my starnut to see if it works, any tips on how to do it?

[Cable Through Forks Doubt]

I was thinking of a way to run the cable of my front brake through my forks, so that I can tail whip. Would it be safe to drill a small hole in the steerer tube, in the height of the stem spacers?

[Fire Coming Out Of The Monkey's Head]

Insane riding, I can't believe that you nailed that gap from the concrete pole in the end

Whats is the geometry of the frame and what stem are you using?

[Echo Tr Wheel Spoke Lenght]

20,24 or 26 rim?

Forgot to mention that, derp

It's a 24" rim, thanks for remembering that

[Echo Tr Wheel Spoke Lenght]

Does anybody knows what is the lenght of the spokes needed in a TR hub with a TR rim for the non-disc side and for the disc side?