Timmeh-Time
-
Posts
43 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Timmeh-Time
-
-
black ones 04/05
-
-
helluva lot of work! will be worth it if you do a good job though
-
-
they were pretty bad iirc...
-
I've made another one of these. Feedback welcome as always.
[media=]
great job, dumb question but im struggling with this have been for a while do you let go of the brakes when kicking the pedals? and if you do is it for the duration of the whole kick or what? i just keep throwing myself backward and landing on my ass
-
just the dh axles alone don't warrant the price jump from the 4play, i guarantee £500 per frame kit is going straight in danny mac's back pocket for his involvement in the design if it was ali c and not danny, and i'm not being insulting here it wouldn't be as high but people who hang on danny's nut-sack will pay stupid prices because they think they'll be able to ride like him
-
mahoooosive who cares and a yawn
-
1
-
-
I really like the 05 with a 4 finger lever. Proper comfy.
good point if you don't use a standard lever mention which rb.fresh.deng etc
and if the 2011 lever is so bad are the likely to be a new one in the works from someone?
-
2011 maggie had trouble with all other maggies
huh?
-
so the 99 model's tpa was rubbish, apart from being ugly the 05's were prone to cracking at the clamp, the only grump i've heard aboot the 2011 model is the ugly lever but i've never tried it and want opinions before i think about doing
-
no one going to make a joke about greasing your o-ring so things slip in there easier?
i will try this out thanks what lube do you reccomend/ the one you use for pokey bum wanks
-
1
-
-
thanks jay
that tarty vid is as much use as a chocolate condom it's already set up and doesnt show the bolts jay mentioned which is the most important part
-
TIMMEHHH help a retard out which way round do they go and how do you get them to click if the axle bolts are tight they dont move and if its too loose they just spin round it doesnt make sense timmeh to me TIMMEH
-
a lad called laura who likes barry manilow awesome
-
Super cheap and supposedly reliable.
Jamie Williams has recently ordered from them and has had no issues.
echo AND zhi oh my
also what country is this based so i know what dollar to convert, there's no contact details either looks dodgy, by no issues did he actually get his order yet?
-
The people who set up those rides actually knew those riders, rather than just wanting to start one up without even knowing who it was for, what had happened to him, etc. It just seems pretty strange to me, but then again my perspective may be different having ridden with him and having known him.
EDIT: It's also nothing about 'deserving' one, it's purely about the motivation and reasoning behind doing it.
what a strange cynical man i pity you
-
2
-
-
This doesn't really seem right.
Weird i think it's very thoughtfull people did it for Beau Oli DJ etc why doesnt that guy deserve one?
-
1
-
-
you may need to put a drop of lube on the o-ring to help it slide on. They are a bit harder to get on then the clips on the plastic backings.
what o-ring there aint one?
They should stay on fine. Are you sure that you are 'clicking' them in place?
What rim brakes do you have? I used LGM with my HS33's both the older style and the newer 2011 and never had an issue.
pre05 mags and i tried on my mates 05 ones and the same problem they come loose straight away
-
platic backed pads click on straight away but the tnn ones i bought dont seem to want to stay on
-
The olives are compressed by the shroud nut to create a very tight fit. The Shroud nut goes on the line first then the olive, place the olive end into the lever then push the shroud over and tighten it. Its fairly simple, See page 11-12 of the following document, you will need a new olive, I think rock n roll bikes is cheapest.
http://www.magura.com/uploads/media/downloads/FELGEN_06_E.pdf
To Fill and bleed watch this:
the olive just slides back down the hose i dont get it lol
-
it's the brake lever end if that makes any difference
-
firstly what exactly do the olives do? and my hose snapped and before i undo the shroud nut and everything falls out
am i right in thinking the shroud nut needs to come off for the olive to go in that way? forgive my stupid question but i dont know -
I cant see the t-vee being anymore than 200g lighter if it bothers you take it to your local bike shop or co-op and go compare
What Zoo! Bars Are These?
in Trials Chat
Posted
yeah they're both 31.8mm diameter