-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by liamfriar199
-
-
problem solved guys! turns out, i had to tighten my back wheel VERY tight and now the crank doesn't hit the frame anymore:S anyways thanks alot to everyone !!!
-
not this one:/ took both cranks off and measured it with a 8 inch electronic ruler thing from the edge of the BB to the other end
-
crank from pedal axle to centre of axle is 171mm
-
ok, so the BB is 118mm ,
crank from pedal axle to centre of axle is 171mm
dont know how to put a pic on :/
-
crank is 21cm dont know length of the BB , its just stock onza rip:/ could i just file down the crank ?
-
title says it all, got another crank for my onza rip, put it on, spin it around and it hits off the frame, its not even all the way on and it still hits the frame. HELP!
-
thanks alot guys!
-
well the first day i got them put on the bike by local bike store they where fine, but then they just started to break about a week afterwards, first both pads stopped moving, then one stopped moving, now they both move but barely even stop the bike unless your pull very very hard, thats why i was thinking of trying out a disc
-
frame isnt even that expensive, i am a complete noob, just chose some stuff and threw them together really
cheers isita, would like to give the discs a try as i have the magura hs33's on front and back and they have been nothing but a big problem
-
hey guys, just wondering what you think i should do...make this or buy a different one for aruond the same price?
this is what i was thinking
FRAME: because color 2012
FORKS: Monty 219 magura
RIMS: trialtech sport drilled
TYRES: maxxis creepy crawler on front and rear
BRAKES: avid BB7 on front, Avid BB5 on rear
CRANKS: trialtech sport
STEM: Trialtech race
BARS: trialtech sport riser OR Try-all rage
just listing the main things on the bike, excluding sprocket , chain things little pieces like that, what you guys think? good build? or bad build?
onza rip 20" to 19"
in Trials Chat
Posted
so im wondering, if i buy a new frame for my 2010 onza rip, will i just be able to throw on a 19" back wheel and thats that?