The dab
-
Posts
37 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Gallery
Posts posted by The dab
-
-
7 hours ago, Sam Song said:
I watched it many times but not quite understanding what happened there.Â
What made you take the back foot off the pedal in the air?Â
Watch the back tyre when he gaps off the boxÂ
-
-
Tried bleeding on bike and decided to take the brake off the bike and bleed it in a bucket of water still felt the same for front and rear brakes
Mates all felt the same
just a preference thing I guessÂ
- 1
-
-
I did submerged water bleeds on mine and even swapped master pistons to alloy and still had the mush
Â
got racing line levers and had solid brakes the first bleedÂ
- 1
-
the koxx Marco hoesel editionÂ
never liked mods really but these looked Â
- 4
-
Would any dremel work alleviate/stop any cracking?Â
-
it’s a becauseÂ
I had a friend who had one
same dropouts and two holes drilled in head tube as hisÂ
think this model were just named which wheel size they wereÂ
- 1
-
Red flag asking for money before starting the job
If they were tradesman and setup properly they’d have trade accounts to buy the materials and charge in the middle/end of the job depending on costs/timeÂ
Atrocious the amount of the cowboys about Â
-
If it’s the levers ross sold then they should have alloy pistons as they are my old ones.
worst levers I ever had on a bikeÂ
-
Do they still have the alloy pistons in?
water bleed or mineral oil?Oil as said should help on the pistons and also check the slavesÂ
-
-
I tried terrex solo years ago on platform pedals and didn’t get on with them well but when I got a bike that came with echo caged pedals a couple of years ago I found my ordinary ribo shoes didn’t feel stiff enough for caged pedalsÂ
So tried the terrex solo and best shoe/pedal combination I’ve ever had just learnt my lesson and had to buy a new pair half a size bigger than I normally wear for wiggle room(think Adidas sizing is small) and removed the insoles
-
Satan
-
Always liked either the trial tech splined crank and ffw or the threaded jitsie 108 the bestÂ
currently have a clean 135 sealed and the drag is worse because of the bearing seals but obviously no dirt ingress like a open ball one
-
1 hour ago, Private Repress said:
I have been considering a dropper post, I run a 170mm dropper on my enduro bike, even at that length though (which is long) it wouldn’t be enough to get up to optimum riding height if at the lowest point in the clamp. It’s does have a lovely Thompson seat post mind
One up do a dropper post around 210mm or 240mm can be reduced Upto 20mm with shims too
https://20twentystore.com/products/oneup-dropper-post-v2?variant=42333518889207
Â
- 1
Cracking clean combo
in Trials Chat
Posted · Edited by The dab
I had one that cracked while installing with a torque wrench
got a new replacement straight away and was fine installing with the same torque wrench 🤷‍♂️