bikerbob Posted October 14, 2006 Report Share Posted October 14, 2006 Hi,I am running tensile UCI cranks and I have a problem with my bottom bracket, it seems that on the drive side the bb axle ends further away from the edge of the grank, and so the drive side crank bolt does not have much thread to hold onto (only about 3mm), can the axle be moved off centre slightly on an isis bottom bracket to solve this problem? I'm afraid I don't know what bottom bracket I am using, it is an onza T-mag though.My second problem is that my Tensile freewheel seems to be off centred, either because the cranks threads are off centre or because the freewheel has been made off centre. Are freewheels normally like this?Many Thanks,Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.