Jump to content

Joel G

Members
  • Posts

    123
  • Joined

  • Last visited

Posts posted by Joel G

  1. wel once you have connected all the bleed kit flush the brake through with water a few times until no more oil is coming out of the exit tube (around 4 times) and then push the water through with the seringe for the last time and when there is no air bubbles in the exit tube get someone told that end and take the seringe side out then put the grub screw back in the caliper and then take the exit tube out and put the grub screw back in the lever then your brake should be bled but remeber before you bleed the brake make sure the tpa is all the way out.

    hope this helps

    Joel (Y)

  2. i ran them stupid coolstop pads on a grind first and they were rubish too i then bought plaz pads and they are a million times better if your buying koxx bloxx they will feel sex when there on.

    theres nothing to worry about

    Joel

  3. i have a water bleed on my brake and i have only changed it once because it froze but if it doesnt freeze (because you have anti freeze)then you should only change it when your brake starts to sponge or if you feel it is pulling back to far when you brake is set up fine. when you bleed your brake make sure your TPA and ur lever are all the way out as this can also give it a rubish pull if you dont do it.

    i hope this helps you mate (Y)

×
×
  • Create New...