1. You need to fill a Bucket/Bath/Bowl with water. 2. Undo the tpa all the way OFF. 3.Take both bleed bolts out. (One is located on the slave piston, and the other is a the lever.) 4. Submerge the whole brake under water. 5. While keeping the whole brake under water, Put your finger over one of the bleed hole and pull your lever in. 6. While still holding your lever in, Move you finger over to your other bleed hole. 7. Let go of your lever. 8. Repeat step 4, 5 and 6 untill you see no more air coming out of both bleed holes. 9. With the brake still submerged under the water, Do both the bleed bolts up. 10.. Take the brake out of the water and check that they is no air in the system. If they is air the the system, start all over agian. Hope I have helped you with them 10 easy steps. It is abit tricky when you start but you will soon get the hang of it