Pepo09
-
Posts
153 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Pepo09
-
-
Something I,ve done before is:
Boil a kettle full of water, then pour the water over the taper end of the damaged crank arm.
The alloy will expand slightly and alowl you to knock the crank are off with a block of wood / hammer.
Good luck
Didn't Work
That's an automotive tool, you should be able to find it in any store which deals with such tools. They're used for removing hubs and bearings.
What almost always works is just undo the crank bolt and ride... the crank will fall off.
I've tried riding and didn't worked I've tried that tool and didn't even come loose xD
-
Something I,ve done before is:
Boil a kettle full of water, then pour the water over the taper end of the damaged crank arm.
The alloy will expand slightly and alowl you to knock the crank are off with a block of wood / hammer.
Good luck
thanks I'm gonna try that right now
-
Would one of these work?
yes that should work but where can I get that! haha I live in Argentina. All my friends are telling me to ride the bike until the crank gets loose... what do you guys think about this?
-
Hi, I'am having some problems with mi driving side crank the thread has been damaged
and I can't get it out...Any suggestions on how to get it out?
Thanks.
-
Nice bike just a question is that the magura CNC lever blade?
-
Spec?
-
Just Loved IT!
-
Ace video!
By the way are you using Rockman 144 freewheel? -
You look really comfortable in that bike
, nice vid Damon. 
Looking forward to seeing your "proper video" :wink2:
-
I did it again
hahahaa nice video -
just couldn't watch it to much black outs
-
Excellent!
-
In my opinion the brake must be replaced by a new one because the brake came broken hehe
-
tried both and the TNNs were better, the heatsinks didn't have the hold I would get with the TNNs
I have a 4 bolt booster set up would it change in the sound of the pads? bite or hold? (of course it will change the hold hehe) cause right now my brake isn't sounding or biting.. Also I have an other question for you Ali hehe... do you think that a frame will crack if I don't use a booster ( I have zoo piranha 09 frame
) Thanks.Also Thanks to all for answering
-
Hi I am going to buy some new pads I was going to buy LGM's cause I've heard that they are really good pads but also the Heatsink one so now I don't know which ones to buy...HELP ME DECIDE
-
I had the same problem and here is what I did:
I took off the clamps and sand the clamps in the part with a sharp file
also here is a video that could help you
Hope it helps,
Peter
-
1
-
-
The lack of bite is more likely the pads or a bad bleed....
Brake is perfectly bleed and the pads are awesome they are home made but a friend has the same ones and the sound that his brake does is L O U D!
-
ok thanks
what do you think about makeing the booster a 2 bolt one? -
Just an odd question, does the frame cracks if you don't use a booster? I have Zoo piranha 09 that has a little thing that is supposed to be an integrated booster.Right now I have zoo 4 bolt booster but I can get any bite from the brake so... should I take off the booster or will the frame crack?.
An other idea is that I can make the booster a 2 bolt by chopping it with the grinder?
What do you guys recommend?
Peter
-
double booster haha..
-
2 rear rims! I can now notice the force you give to them hehe
-
Nice video, good lines and also very relaxing
-
now that's a colourful bike
Spec?
-
I'm loving those fans frames
Great video edit and very nice riding , liked the music it was relaxing Ace video for me .
Charlie Rolls
in Videos
Posted
I mean WOOOW!