-
Posts
84 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Billy-C
-
-
What are the ticket prices?
-
Hello i live in north Devon and i went to a tester comp last year down by newton abbot and the poeple who ran it said that there was going to be more this year some time.
i would also want some non-serous comps and i wouldn't mind marking out and stuff like that but im also 15 so yea..
billy
-
Looks lush!
-
Looks LOADS better.. like that!!
Nice work mate
-
hello i have just got a set of new cranks and a bb but im having trobel getting the old cranks off the old bb..
Its a square taper bb and i really want it off!!
CAN ANYONE HELP?
-
Its a trialtech sl rim.. i have hs33s front and back. Im running heatsink coust pads.
-
Hello i have grinded my rim and it has gone smooth agen only after 2 rides.. do they last longer than is? My grind was a quite deep one so i thought it would last long but i have done the same type of grind on my front rim and its still as good as new.. I'm very confused and can anyone help?
thanks billy
-
I have the same rims as you and i <3 them....
Also my mate has a limey but he has two carbon hopes on it..
Nice bike though
thats well nice man bet it rides ace !, advice though, switch back to standard maggie hose and grind your rims, brakes performance will improve dramatically !
I think the standard maggie hoes aswell.. the braded one makes it all slugish.
-
The gollywog is probably worth more than the bike! Aren't they antique/uber rare?
Nahh i only picked it up for like £2/£3
-
Loving the Golliwog, I must say
Thanks!
To five people a chance you should put the full spec up. I would probably pay bout £300 for that.
Yea i will do that sometime mate...But thanks.
-
-
Use Tar!!
-
Echo green or purple ones!
-
Looks mint!
Where did you get that frame from and how much was it?
-
Thanks yea i found that!
-
Hay what i do is I take the brake off the bike and pull the pads off. Then take the bleed bolts out and put it in the bath full of water. Bleed it with a syringe untill you see all the air come out of the leaver. Then put the bolts in BUT make sure the bleed bolt holes don't come out of the water because air will get in the brake and make it fell crap agen. Then its done..give it a go it works for me really well.
Also i have had water in my brake for ages and it has never froze in my brake over the winter.
Hope it helps and that its clear to you.
How would i go about getting a pair of your pads off you mike?
Thanks
-
Hay here is my Echo lite 09
Spec:
Forks - Try-All Forxx 20"
Headset - echo SL green
Back brake - Is a Hs33 but it has Echo TR cylinders, Chorrillas TPA Wheel and Heatsink Coust pads mounted in CNCed alu RockMan Red backings
Front brake - Is also a Hs33 with with Echo pads
Bb - Onza...witch is CRAP!!!
Cranks - Onza Muscleman
Pedals - Onza
Freewheel - Tensile 96 Click
Back wheel - A Trialtech sport 19" rim laced to a Echo TR Rear 2010 hub with Sapim Race Double Butted Silver Spokes and Halo green Nipples with Echo white rim tape.
Front wheel - Is a Trialtech SL 20" rim laced to a onza hub with Sapim Race Double Butted Silver Spokes and Halo green Nipples, with Echo white rim tape.
Tyres - Maxxis Creepy Crawler Rear 19" and a Maxxis Maxdaddy 20"
Handlebars - old Onza crap!
Stem - Also old onza and also crap!
Hoping to get new bars and stem sometime soon!
Here are the pics then....
comments welcome.
Billy
-
Hayy...
I say these pics on tarty of the 26" RockMan Kortz 2 and was thinking that some green bolts would set me bike of really nice...But I don't know where I can get them.
Can anyone help?
Thanks
Billy
-
where can i get the tires that are on the Zoo?
-
Very easy to do;
1. Place the cups just in the frame and no more (put a tiny bit of lubricant on if necessary).
2. Wedge the whole lot in a vice .
3. Slowly tighten the vice making sure that the cups go in evenly.
4. To minamalise scratching of the headset cups while in the vice use a couple of blocks of wood.
I hope this is clear enough for you
Tom
Yea thanks thats really clear!
thanks
-
I do it with my dad but if your not too sure just take it to your local bike shop who should be able to do it on the spot for you!
I put a block of wood on the bench, rest the bottom of the headtube on there flat, place the top cup in and hold it in place with another block of wood and tap it in by hitting the wood so your spreading the force out over the whole thing.
If you get what I mean?!
Ohk thanks dude.
-
Hayy guys I have just got a new Echo lite frame and a new Echo sl Standard headset.
Now how do I fit the headset into the frame? Do I need a headset press or can I just use a hammer and tap it in?
Can you guys help?
thanks.
-
I run a hs33 on the front and back. I love it!
I run a hs33 on the front and back. I love it!
-
There is a hope green head set on tartybikes for £60 mate
Bike looks nice though
South West Trials Series
in Clubs and Competitions
Posted
Yea im interested i would do the whole thing I could also get a lot more people to come that aren't on the forum.. hope this thing goes ahead would be grate