yabble007

You have to remove the left side first!!!! non drive side! both sides thread off forwards, so put the tool in the splines of the bb and turn towards the front of the bike on both sides. Left side then right.

If you still have fluid in your brakes put you finger on the non problem cyclinder and compress the lever making the dodgy piston move out, sometimes they pop off, sometimes you need to take the bleed grub screw out and just pull on the bad piston till its free of the calliper housing. they do just come straight out

Hey my name is Charlie. I ride a custom bike made up myself, picture will follow soon. I ride in the torquay area devon so if your about in this area let me know if you want to hook up. I was out of action as i separated my fib and tib breaking the ligament holding the two together, did that trials riding on an embarrassing 1ft balance beam (LOSER) so i need to get back on it but my area lacks in riders. I also have a bike shop called bikin motion in torquay, i can do pretty much anything sevice and repair wise to a bike so if you need a hand or some advice send me a message, also if your in need of new parts give me a shout. Hopefully see some of you for a ride soon.