the ug man

Just spray over it them. You need the primer so the paint sticks to the bars. If you need moor help just say. Hope it all gos well and that you take you time doing them.

do you no what make they are and can you get a pic of them

Are they polished or do they have a coating on them if they are polished its not a problem just paint over it. If the are coated in something you will need to remove this i think. You may be able to got over this i'm not shore.Give it a go and if it do's not work them try to remove it from them.

It depends on whats on their at the moment. If they are painted all ready strip them down. Best to do this outside and the best stuff to get it of is to yous a scaring pad and scrub it in to the paint. Then give it about 5 mins intel the paint starts to bubble and then wipe it off. Do this intel its all off. If they are anodized you will need sum costc soda to remove the anidising. Do not put it on for long as it will dissolve the steam and bars.Not good when that happens. When you have them striped you need to put sum gray primer on about 2/3 layers of it so its smooth and even. Then you need at least 3 cots of the spray paint you diced on and then give it 24 hours to set. Then lacer them put on atlest 3 cots. As it will stop them skrathing Them give them about 30 mins between coats. if you do it coretley if will look very good and last for a long time. i may of got sum spelling wrong as the spell checker did not find one for it. hope this helps you

I know it could of been a lot wores. Its starting to go down now but its still sore. I cant move my fingers much. I snapped my forks 3 weeks ago that was fun

i no i do yous it but sometimes it cant find the right one so i get it wrong. as i am dislexic[sp]

no my computer is a bit shit and i cant put them on. but there is about a 2 inch lump on the side of my wrist and i cant bend my fingers or hold stuff as theres no strength

i was in the town hall gardens in Cheltenham today messing around on the banks and went to blunt on one of them. my rear brake slipped and i landed on my wrist. i went to a and e. sat there for about 2 hours and they told my that i have ripped the tendon in my left wrist so it is swollen up and they said i cant ride for at lest a week. i am going 2 be bored as fock for a bit. soz for any spellings i have got wrong.

viz rims i have them. they gring well and they hold a grind well get them from www.trials-uk.co.uk

i was at a mates home lost night and we where playing burnout 3. my mate put the controller down as he was txting a mate and the car stated go go by its self. it got better and better in tell it could do most of the moves [forwould/backwhould/sides/nitro camera] so we started thinking what the hell is going on. the next thing it did spoked me. it whent in to the profile setting and started to put in my nickname [ugalug]. so at this point i started to think f**king hell whats going on. so my matye came in from his roam looked at it and said tern it off so i did. when i turned it on again it was not doing anything so i thort what in the hell was that. turns out my mate had the dvd controller and was doing it :$ . he has been doing it for a bit to my mate steff. as the dvd controller is inferred you can only press 1 button at a time. so if you want to skere the shit out off someone do that. it was very funny after. the little sod . sorry for sum of the spellings the ugman

no he hasn't got any and can not get them he will be doing ko bikes at sum point and they look lush and he can get a speedrace bikes they are about £150 i think he said they are likc the old echo team hope this helps

i ride most days or at least 3/4 times a week and my pads are still doing strong they do not slip and i have a completely smooth rime at the moment but i did have grinds on my old rim and the pads did not go down

on the zoo pads i have i have hade for over a year and they are not even half way down yet and i have a gring sum times at ther moment i have a smoth rim an thay look on so well best ones i have ever had hope this helps

bike: old zoo lynx type: mod pros: my and it was cheap cons: i have had it welded and i need 2 of the brake mounts helicoled[sp] what i'd change: the frame as its a bit old recommend:no get a new zoo insted

my old zoo lynx is about 3/4 years old and is just about had it

i now danko has a set of 05 echos the cheap ones and has a bash and an eno on it and it fits fine

get an echo bash they are stroger then the thin ones and for the bb get one thats more than 118 as i have one and my 04 echo cranks and an old megam bash just fits if you may have to grind the tabs off the eno or get a 127.5 mm bb and that will be ok hope that helps

i have a splitter and a have 2 syringes 1 for each side and it works perfitly[sp]

you can get a 13t micro drive free wheeel for a bmx

what the f**k m8 when did you join up is it on bevs laptop and whats this about the ribs m8 you silly sod

i might be going to oxford to se my dad he is in the hospital[the hart one] and if i go i will tack my mod so if you are going are live there do you wana go riding i will get there at about 11am i think

thats ok. i want that one[soz] its just all my mates call me ugalug so the cave thing sounds good all i want is the ugman bikes and then a little stick man on a bike and a outline of a cave

if you help i might send out a prototype part for you to test just keep the logo simple and in at most 3 colors

right me and a mate [seb] are making sum bike parts i have come up with the looks and he can mack them at university in london on the cad/cnc tools. but i need help to do a logo for the brand name its going to be the ug mans bikes and i want to have a stick man on a trials bike coming out of a cave next to the name if you want to help draw a pic for it that whould[sp] be brill thanks and by the way we will be doing boasters and ffw bash guards and pos more parts when we have sorted the first parts thanks the ug man

hello i'm james i live and ride in cheltenham let me now when you go ridding and i will come along