lovatt

Cool sounds good think ill be going up with wayne and a few others as well. lovatt

From the top of the bolt they are 35mm (3.5cm) and from the start of the thread they are 31mm (3.1cm). hope that helps lovatt

To be honest i think their a very good idea but for the price they are not worth it, if you just set up your break well you wont get any flex from them (which you will notice). Heatsink pads are so good, it doesn't matter about a little modulation so it wont make a difference to the break. lovatt

It all depends on how long away you are looking. Yes i think that Sam Wheeler is going to be a brillient rider but you could look further down the line. I think that in 5 years or so Robbie Peacock will be an outstanding rider. lovatt

Ye i live in bingley near bradford and leeds. We need to get a ride going sometime in the summer or now if u want. Should be able to get some people out and about. Bradford is a good place to ride and it would mean that we i could get sad acts like wayne and bucky out then without complaining. lol lovatt

I run a koxx levelboss stock and there is a lot of frame flex but the best one in my opinion is the echo 2 bolt brakebooster. lovatt :angry:

No not for a long time so your best off either keeping all old ie. chain and cassette or all new so chain, cassette, jockey wheels and most likely the front chain ring. lovatt :angry:

Ye post this thead in another 3-4 months and well get a proper ride set up. Thier should be a lot of us from leeds who woudln't mind coming up for a ride. lovatt :angry:

Ye I would say that a longer frame would suit your height much better. Also try bikes with a higher stem that could help much more becuase it will stop you from arching your back (stopping back pains). A long bike will also make your riding much better so I would say that a longer bike would help alot with your riding so it would be a good change. lovatt :angry:

Go for the frame first. You'll always imporve wiht a better frame. lovatt :angry:

Ye an armourdillo will fit on a monty. i know 2 people who run theirs with them on. You could also look at chain stay protection. I find the best thing to use, and so do alot of other people is hose piping. all you have to do is cut it to the right size then just zip tie it on. lovatt :angry:

Ye sure you could. Just as long as you havent chainged your chain as well because other wise it mite start scipping alot. lovatt :)

Ye but you cant switch hope leavers around so it wouldn't work unless you used a front leaver. lovatt (Y)

Just make sure that when you tap that you lean forwads so that you dont fall back off and, it will stop your backwheel from hitting the object befor you have got up it. When your next out have a look at some one who can tap and look at how they do it for a good 5 mins, that way you will get the idea. Also dont be scared of hitting the wall hard and fast. lovatt(Y)

koxx browns are gud but they dont work that well in the wet without a grind. I found that zoo pads worked well without a grind because they are so soft. lovatt :P

It sounds to me as if you havent learnt to tap yet? What you need to to is find a wall which is the same size as the pallets if not a bit bigger. All you have to do is do exactly the same as if you were going to back wheel it, but keep your front end down and tap the corner of the wall with your front wheel as you go up. Dont worry it will take time so be patent. As for side hope i find the best way is to get balanced next to the wall then when your are, get onto your back wheel and strait away go up to a side hop. Try to mover forward when you do and go to your front wheel, that way your front break will pull u up much like and endo. That way you carry the momentum into the side hope. Make sure that you tuck your body into your bike. This way you will get much higher faster. hope this helps :P lovatt :D

The one waynio had is the one i ran for 9 months, and i loved every minute of it. So much stopping power its unbelievable but you can also get great modulation from the brake. I have used maguras, vee's mini and C2 before and the 6 pot takes all the best qualitys from each brake and none of the bad ones, plus its hope, so anything goes wrong and a couple of 1st class stamps and its all sorted for you :P i would consider this brake other than anything else. Here's a quick pic. of me with my 6 pot :'( Lovatt :D

was speaking to wayne yesterday and he has a few left at airevalley. check my sig. for link :P Lovatt :D

sounds really good so far. For wheels through personal experience of profile king hope and more i would have to go for the hope front and rear hubs every single time. purly due to the simplicity and quality of the hub and the excellent quality of the service from Hope technologies. Build the hubs onto either Echo, Koxx, Dx32 or onza for the rear. For the front i would use again koxx echo onza or mavic. For the single speed tensioner Fresh products would be ideal as they are very robust and easily adjustable. Also they can be taken off easily for when you need to remove your wheel. hope this helps :P Lovatt :D

hey. just wondering if any of you are going to the fort william uci trial on saturday. also just wanting to know what its like if u have bin before. hopefully i will see some of you on the street ride on friday night or just on saturday. lovatt :-