nb88

Thanks a lot :P I'll go set 'em up now. cheers

Yo all, just wondering what sorta angle you zoo! bar owners have. I've got the zoo bar and stem and the little 'crosshair' on the bars cant go in the middle of the stem as thatd make the bar rise leaning towards me. It could be that it goes in the bottom of the stem clamp - where theres a bit of space and you can see it, and thats how it set up at the mo', but the rise is quite far forward and the little Zoo! symbols are facing a little bit down... so basically do you take any notice of the little 'crosshair' thing in the middle of the bars, or just set them up how you want? (like with the zoo! sticker horizontal or whatever) Charz. Noz

Well if that crazy bloke had been scary it might've got me because my volume was on loud and i didnt think it was a screamer :lol: .

I use that aswell - but i take 1, and it seems to work fine (Y)

If theyre stiff then it does sound like a major problem...especially if its 15mm out :shifty: . I have a feeling my python stays are wide because you're meant to use snail cams on the inside - but im not, ive got the profile with no spacers at all, and just bend the frame when i tighten the wheel bolts. Anyone know anything about this? It's a python '04 and i seem to remember my mate having the same thing on his '05 a while ago too. Is it a problem if i dont use snail cams? Should i have some washers or whatever in there do you think? Cheers. Nozman.

My zoo! python seems to have really wide dropouts :shifty: . My profile hub can fit in it very easily with about a cm space each side... and i bought it 2nd hand...are the dropouts screwed then? :shifty: . When i tighten the wheel bolts the dropouts have to bend back in quite a lot.

Hahahahahaha! That dog rules

I had monty x-lite 27" ones. They did feel pretty short actually so that mightve been why...got zoo! bar and stem now :lol:

You guys need to visit here: Masturbation forum :'(

My monty x-lite made my back ache to hell :'(

Yeah of course :blink: lol.

pentium 4 1.6ghz, nvidea geforce 2 gfx card, 80gb hdd... it runs fine and i dont want to spend much money on it, especially as i dont use it for that much, other than surfing the net. But some games i want have recommended specs as around 1ghz, and 512mb ram. So i want to upgrade the ram :blink: also thinking about putting 2 hard drives in raid with windows on a seperate partition - anyone else done this?

Hey all.......ive got 384mb of sdram in my pc at the moment, its a dell about 3 years old. I want to replace one of the 128mb cards for a new 512mb one...but ive heard it can cause problems if all of the ram sticks arent the same manufacturer? I've found a good samsung card on ebay for £30 but mine are made by infineon or something. What do you guys think? I'm also after a good, quiet large storage hdd - preferably under £50 - can anyone recommend one? I've found loads on ebuyer but im not too sure which to choose :blink: Thanks. Noz.

Hey all... just nitromorsed my magura lever body, and slaves, and its all done now :) . I made sure i washed out the inside thoroughly so the nitromors cant damage the seals as they are plastic - but is it possible that it could corrode it or whatever? Just worried incase i should do some more washing and bleed it about 50 times to make sure its all clean :( cheers noz.

I say get an echo team, or the long python :( ive got a long and it feels great to ride ^_^

Or you could just call it 'Shit'

Good program on now about islam after sept 11 if anyone is watching :turned: gives a new perspective to the whole thing and is very good (Y) might be useful to watch especially to some of you muslim-haters on here, might open your eyes to the truth ;)

Awesome film (Y) :turned:

That sounds good tom i love hope levers :turned:

I thought the ronnie/reggies were exactly the same material as the echos? and were practically the same as the old echo rims (that had drillholes). Same goes for onza hog and viz - arent they both just tryall copies, but with eyelets? :turned:

Just wondering as i saw loooooads of bodged RB/magura brakes at the abingdon DJ ride. I did use an RB lever but ive now gone back to standard magura...

Cant file it as it holds the part which the long threaded TPA thing screws in to. Theres also a hell of a lot of lever that is just 'nothing' - where the lever just hasnt reached the cylinder bit yet... and its not the bleed as i tried a normal magura lever and its fine. I can still use my rb lever though i think - i put the gold things back into the lever and so it still fits in the RB body. The bodge hasnt seemed to work at all :lol: bit shit in general, lol... so weird going back to a solid brake too! Might just keep the ol' magura on.....

Working now...just needs a bleed Another problem though - the part of the lever near the piston is wider than a standard magura one, so when i pull the lever it stops dead about an inch before it hits the bar due to it hitting the cylinder bit. I'm guessing everyone had this problem...tis rather gay but ill just have to have my brake bite further out.

OK the goldy things dont actually fit after ive filed it so im guessing not (Y)" . cheers guys almost done now.

I've got some heatsink seals but i just dont like the rb body in general really...ive started filing but im just not sure about the removable gold things....but im guessing you just put them in as normal. thanks noz.