mrturner08
-
Posts
138 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by mrturner08
-
-
yeah mate,
that was well funny!!
-
May I ask the pro's off metal backings and how do you refil them???
~Matty
:DJust cut the pad down to size, so its got a nice little snug in the backing. You don't want the pad to be too small or its not going to sit right, and then glue the pad material to the CcCed backing.
(after I've glued the pads and backings together i put them in a heated oven for about 2mins. Just to seat them properly. Then leave them to go hard. )
pAuL!!
-
alright mate, i recommend you to get these coust's pads with CNCed backing's. ( i have them ).
'They are amazing' and they will work perfect on your light grind!
pAuL!!
-
Never ever heat any part of it up!
These are the words of wisdom from the Tarty boys.......
You'll need a vice, pair of maggie pads (preferably koxx blues or brown), a knife and a nylon mallet.
Pinch the maggie hosing in between the two pads in the vice. You're gonna need them done up tight to stop it moving but the pads will not damage anything.
Run the knife around the inside of the hosing to chamfer the edges. This helps the barb fit in easier.
Use some mineral oil to lube the barb and the hosing and then tap the barb in with the mallet.
You must make sure it goes in straight or you'll damage the hosing.
Rob
OK. thanks for your help pal, i have it sorted now I've found some hosing with the barb in. yay!!
pAuL!!
( THIS TOPIC CAN STAY OPEN AND OTHER PEOPLE CAN TELL US THERE ADVICE TO PEOPLE WHO MAY HAVE THIS PROBLEM ) -
hello people, popped my back brake two day and i can not get this 'Magura Barbed Fitting' in the end of the 'Magura Hose.' :@
I've try-ed everything i know.
I try-ed heating the hose and squeezing the 'Magura Barbed Fitting' into it it's just not going to happen.
I try-ed heating the 'Magura Barbed Fitting' and squeezing it in the hose same again not going to happen.
I know you can buy the hose and the 'Magura Barbed Fitting' together but, it needs doing today.
COME ON PEOPLE how is it done???
pAuL!!
-
i think you should get some coust's pads, i have some there are amazing. they have a nice sound to them and have a good grip the the rim when pulling stunt's. Work perfectly fine and i WILL be getting more in the future.
pAuL!
-
Hey guys last weekend i put tar on my rims and it was a massive improvement.
I always thorght it was rubbish untill i actuly tried it.
What do you guys think about it.
Cheers.
I don't use it because my coust pads are amazing. Never really used TAR because I've always had an amazing brake. Try using the search topic more, there is loads of topics about TAR and what people think about it ect...
pAuL!!
-
yeah i play on it all the time when im bord ect...
its well easy. i can pull some sick stunts on it. back-flips, double back-flips, front-flips double front-flips. im not being big headed or owt its a fun game to play sometimes.
pAuL!
-
I'm a witness to this drop and he dent land to double it was getting that way but defiantly not double
So you didn't land double, you nearly did!!
if you did, beacause i won't there good lad
-
Cheaper option:
Ring up SMBBearings - 01993-842555
And ask for 4X - 6802-2RS
Will cost around £12/13.
Get the standard chrome ones too.
More infor here: http://www.trials-forum.co.uk/forum/index....showtopic=57836
all i need to know is which one out of THESE TWO do i need!!! and thanks for that other info..
Profile Hub Driver Bearing OR Profile Hub Shell Bearing <<<< i think it might be this one!
Paul!
-
hello guys and girls,
need your help, i have a profile mini and the other day ONE of the bearings went.
And on TarTy there are TWO bearings for the hub. Which one do i need?? i need the one thats on the drivers side.
This one
OR it might be tghis one
Paul!
CAN CLOSE WHEN I HAVE THE ANSWER. CHEERS
-
my threads went the other week, so i desided to E-bay it, this is what i got. Works like magic it does.
-
hello as it says in the title what made you start trials just wondering thats all Ryan
Ryan what made you start Trials i wonder??
-
i used to get about £166 a week thats about £664 a month till i did one, and never went back. ((Long Story)).
wished i stayed there now
Paul.
-
cheer mate you help alot, and talking about oven's
what temperature does the fan oven need to be to heat up the glue??
Paul!
BUMP! any one?
-
i support my legs really well they support me. i don't like football so if i had to i would support nottingham forest because that's my home town.!!
Paul!
-
you shouldn't have bought another set of backing's if you allready have a pair. whoever said that is talking shit.
You can remove the old material from the backing's and fit new material, whatever material you want can be put in them. Usually heating them in the oven will break the glue seal but it depends on what was used originally.
cheer mate you help alot, and talking about oven's
what temperature does the fan oven need to be to heat up the glue??
Paul!
-
-
you should have bought the coust-sinks if thats what you wanted! coust pad material in cnc backings.
i would of done but i got them free with my order that took the piss ages ago.
-
today i have threaded the top thread's on the back of my bike, well they've bin playing up and now they have totally gone.
where can i get a helicoil kit from??
sorry for robbing the topic just need to know quick.
Paul!
-
For gods sake, use MSN or email to duscuss that. You're never going to get validated if you carry on like that.
i know, if he get validated before me then i going to be very mad. Ant use the spell check that's why it's there mate.
-
just put my coust pads on and there so much better than the red heatsinks, they grip abit more and give more sound out.
Is it possible to put the cnced backing off the red heatsink and put on the coust's?????
thanks
Paul!
-
i think snowys are rubbish ok on the front but not on the rear because they didnt hold me (12 stone) cousts were good for me on a grind but my mate has the heatsinks in cnc backings hes only a lil fella but the lock really well and have a really nice sound with them
so either the cousts or heatsinks i would choose and sell the snowys
kool cheers mate!
-
ok taking about pads ect...
i have three sets of brand new pads.
CnCed red heatsink,
cousts,
white snowy's,
just woundering which pads shall i run i have a midium grind. So.. which do you think are the best out of the three?
thanks
Paul!
Video
in Beginners Trials Chat
Posted
haha nice Afro there Mr, i like it. I'm not surprised you cant have a helmet because of the 'hair' keep it it's cool as. Video was good. Some good gaps and the gap to front that was cool. Them hooks were awesome man keep it up dude!
pAuL!!