arran on t-pro

there good if you get one of the more expensive ones on the market.because the cheaper ones look rubish and probobly wont be very good.and as you progress youl want a better one if you get a cheap one any way so get a good one first :angry:

i run plazmatics with no grind but i use tar so they will be good with a grind probobly.my mate runs cox blox with a grind and they are ace.they lock perfectly and they are reliable :angry:

monty brake spray is poo :angry: it wears off in about 10 mins so you have to carry a big tin round with you plus it tuns your tires and wheels white and sticky

tar is a life saver without tar i would be dead now.tip only put it on the back rim so that when your riding along streets to a diferent spot you can use the front brake and it wont sweek thats what i do :angry:

keep riding untill they go hard then put hand cream on them on a night u can use sandpaper to soften it up :angry:

mine used to do it until i superglued it and its been fine ever since but you could use lock tight but super glue works good look

hi i've got a t-pro and there better than t-bird and t-19 but u have to get riser bars and better forks because i find them too short.i used to have a base ta20 and that was an ok bike but the brakes let it down.if you are getting one of the two i would get the base because it is a better looking bike and if your putting maguras on it it will be even better :(

practice doing little hops on the back wheel on a flat surface.Then when you have got comfortable with that try moving forward a little each hop.then when you have got that dialed you can do it on the edge of the gap.remember, dont get too close to the edge or your back wheel will go straight to the ground. :(