Jump to content

Brake Problem!


Ste Wilson

Recommended Posts

sounds like you have oil on your pads

ways you can try

1.sand down the pads a bit, so it will have fresh material

(it might not responded, when you put it back in, thats ok just keep using it till it does, just needs to wear back in)

2.try burning the surface

(this is trying to remove th oil in the pads)

3.drown in white spirit, then set it a light

(this is trying to remove th oil in the pads)

4.new pads :P

hope this helps

Edited by ffdevil
Link to comment
Share on other sites

sounds like you have oil on your pads

ways you can try

1.sand down the pads a bit, so it will have fresh material

(it might not responded, when you put it back in, thats ok just keep using it till it does, just needs to wear back in)

2.try burning the surface

(this is trying to remove th oil in the pads)

3.drown in white spirit, then set it a light

(this is trying to remove th oil in the pads)

4.new pads :P

hope this helps

thanks :D will go and try the burining one B)

Link to comment
Share on other sites

It sounds like you have contaminated your brake pads the best thing for that is, put your rotor in the dish washer, im not sure if this will work with magura pads but it works with hope pads put the pads in the oven or get new pads and it should be fab then.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...