J Trials 31 Posted May 25, 2012 Report Share Posted May 25, 2012 Hey guys need some quick help, I just got these not too long ago. http://www.tartybikes.co.uk/1920_inch_wheels/onza_blade_wheelset/c61p11427.html And am having a problem with the rear wheel rolling the tire off the rim. Anyone else having this problem with this rim? If I swap to a Monty TI rim (not sure if it's 42mm or 47mm) would that solve this problem? Or is something I'm doing? If I'm going to swap rims I'm going to do it tomorrow morning so need quick answers. Cheers Quote Link to comment Share on other sites More sharing options...
harmertrials Posted May 25, 2012 Report Share Posted May 25, 2012 The odds are it's the beading on the tyre. I've had numerous creepys do it, and try alls. Sounds mad but superglue all the way around the gap side of the beading holds it surprisingly well. Quote Link to comment Share on other sites More sharing options...
J Trials 31 Posted May 25, 2012 Author Report Share Posted May 25, 2012 The odds are it's the beading on the tyre. I've had numerous creepys do it, and try alls. Sounds mad but superglue all the way around the gap side of the beading holds it surprisingly well. So new tire may fix the problem? I'm using the Creepy I had on there before I got the new wheels. Not gonna superglue it as I'd like to get my tire back off easily. lol Quote Link to comment Share on other sites More sharing options...
harmertrials Posted May 25, 2012 Report Share Posted May 25, 2012 You can still get them off with a tyre lever. I'd superglue it, if the problem goes away i'd go for a new tyre. Quote Link to comment Share on other sites More sharing options...
J Trials 31 Posted May 25, 2012 Author Report Share Posted May 25, 2012 (edited) I might think about it, would swapping to a little bit wider rim be a good idea? The Onza is 38mm and the Monty is either 42mm or 47mm, not sure. Whatever was standard on a 07' TI Edited May 25, 2012 by J Trials 31 Quote Link to comment Share on other sites More sharing options...
harmertrials Posted May 25, 2012 Report Share Posted May 25, 2012 Yes I don't see how it wouldn't assist it. If you remove your tyre you will be able to see a dodgy bit of beading most likely. Quote Link to comment Share on other sites More sharing options...
J Trials 31 Posted May 25, 2012 Author Report Share Posted May 25, 2012 Yes I don't see how it wouldn't assist it. If you remove your tyre you will be able to see a dodgy bit of beading most likely. Like a little tear on the edge? Quote Link to comment Share on other sites More sharing options...
harmertrials Posted May 26, 2012 Report Share Posted May 26, 2012 That or a kink in the beading yeah Quote Link to comment Share on other sites More sharing options...
J Trials 31 Posted May 26, 2012 Author Report Share Posted May 26, 2012 That or a kink in the beading yeah Alright, well that's the issue then, cause I know there's a little tear on the edge. Thanks for the help. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.