Jump to content

Profile Problem?


ARSE!

Recommended Posts

QUOTE(deanie-b @ Feb 20 2006, 05:43 PM)

Hold the other bolt?, Or undo it the opposite way to what you do the other bolt at the same time :)

If its properly stuck doing that will probably just undo/tighten the other bolt instead

Try taking the other bolt fully off, and holding the axle in place and then unscrew the stuck bolt. Maybe put some cloth over it and then use mole grips to prevent marking/damaging it. Dont clamp hard, just lightly to stop it spinning.

Link to comment
Share on other sites

You need to tighten the opposite side (just finger tight) then hold it with an 8mm allen key then undo the stuck side with another 8mm allen key and loosen side which was not stuck. It might be worth giving the threads abit of a clean when you get the bolt out to try and remove and stuff in there that might cause it to happen again.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...