zonaboy dan Posted December 31, 2006 Report Share Posted December 31, 2006 (edited) hi was wondering how to make my proflie louder. iv just had some new bearing and springs and paws and it is still quiet so if eny 1 could help id be greatful thanks dan Edited December 31, 2006 by zonaboy dan Quote Link to comment Share on other sites More sharing options...
Saracen Kid Posted December 31, 2006 Report Share Posted December 31, 2006 why do you want it loud?!?!? Quote Link to comment Share on other sites More sharing options...
Dave Lowe Posted December 31, 2006 Report Share Posted December 31, 2006 you may want to give it a good clean out and put a very little light grease, and i mean a little. Quote Link to comment Share on other sites More sharing options...
rossmonty221pr Posted December 31, 2006 Report Share Posted December 31, 2006 well when i had my profile, i just ok the pawls and springs out and bent the springs. then put the pawls back it then it was like i daddy. cheers ross Quote Link to comment Share on other sites More sharing options...
ytr_rich Posted December 31, 2006 Report Share Posted December 31, 2006 um why would u want your profile to sound louder they sound lush already mate rich Quote Link to comment Share on other sites More sharing options...
flas12345 Posted January 1, 2007 Report Share Posted January 1, 2007 himy friend used to take his apart and clean it all out then he put it back on and used to spray gt85 into it and it sounded well loudertry it, it might help Quote Link to comment Share on other sites More sharing options...
20inchsuperstar Posted January 1, 2007 Report Share Posted January 1, 2007 (edited) magaphone,mattor do what the others say,i have not got any idea about these as i run a front freewheel, they sound like sex as they are so why make it louder?you'll just end up pissing about and wrecking it. but do what you feel best Edited January 1, 2007 by 20inchsuperstar Quote Link to comment Share on other sites More sharing options...
Jsy Ben Posted January 1, 2007 Report Share Posted January 1, 2007 Performance over sound, read that again. Quote Link to comment Share on other sites More sharing options...
Mike W Posted January 1, 2007 Report Share Posted January 1, 2007 hey i suppose you could de-grease it but im guessing it wouldnt last long, my profile is loud enough allready and thats only a week old and full of greasemike Quote Link to comment Share on other sites More sharing options...
zonaboy dan Posted January 1, 2007 Author Report Share Posted January 1, 2007 hi my profile is quite old and quite dull that why i made the topic 4 all the people ask y i wont to make it louderdan Quote Link to comment Share on other sites More sharing options...
Barbra Posted January 1, 2007 Report Share Posted January 1, 2007 the best way to make it louder, as has been stated is to bend the springs Quote Link to comment Share on other sites More sharing options...
moza Posted January 1, 2007 Report Share Posted January 1, 2007 Hi, you could either bend the spings a little, make sure you bend them evenly though. or you yould clean it out with a bit of brake cleaner and spray a little silicone lubricant spray, or wd40 whatever you have to hand.Moza Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.