XPbIM3

203mm disk looks huge, iam afraid its too easy to hit it when sidehopping(left side is my native)....anyway already oredered 185mm version

wahah, yeah) thx anyway, but i think i know the place where i can get 185mm bb7 ;-)

does anybody compared brake power on different rotors on bb7? swithing from 160mm to 185mm maes a lot of difference??? iam about buying a bb7 with 160mm rotor and unsure will it be enough...what you think? (keep in mind, iam using front hs-33 but i dont realy like how it works....worst braking)

east or west tar is best!

try-all/tensile/ENOtrials - choose any freewheel you like, they all good enough

here, some polyurethane Vee pads handmade by me

i am using front magura with polyurethane handmade pads and rear Vee also handmade pads - works realy nice!

hm... http://www.vizbikes.com/stem26.jpg maybe this? (120mmx20degrees)

>Service Unavailable wtf? broken link?

sory, i missed something, but what the limey's Geo? if its +0mm-+25mm the low stem will suit you well (ex: 110mmX7degrees + Zoo rise bar or some flat bar) if more than +35mm U should get some high(20degrees or even more) stem and flat or risebar(depends on what you prefer more)

imho dx32 is strong enough but keep an eye on seam line

nobody is too old to start doing trials i can bet: just 1 season + help from skilled riders and you will do a good progress

i dont realy think that Nokon will tottaly solve your problem i am using alligator housing and alligator cables with teflon surface - it works perfect with AVID singledigit5 or i think Jagwire teflon cable+Jagwire housing will do the job too and take care of how you cable routed from lever to brake

you are talking about mod, arent you? in that case you results arnt bad, keep training i wish you will recover you ankle completly freewheel on hub - same config as i have =) thanx everyone it seems i have to try 22-18 and maybe get used to it to say exactly will my gap increese or decreese...

just cant choose what gear ratio to go on now iam using 21/18(=1.16666) on 170mm but may switch to 22/18(=1.22222) or maybe buy some 175mm cranks and go 22/18(it will be like a 1.1873 gear on 170mm cranks) So the questons are: Does anybody uses a 22/18 gear ratio with 170mm cranks? & how high/long is your pedal kick? What is yours recomendations to me? what gear to use?

yeah 430...not good =/

what U think abou it? ive heard that they are not too strong(intrested in magura_mounts version).... how long is it?? 430mm?

i have ENO, but tensile is a good choise too i think...but what about try-all? yes, i didnt read all the threat,especialy last post))