JackF

done exactly the same to and my cones were bent outwards so the ball bearings kept falling out. got a t- master now from my mate and it works brilliantly. only thing is that the onza bolts that come with is are s**t so i would buy some hi-tensile ones if you can or get some spanner head ones like i run. Jack

thanks as i said it was to definitely make sure since they would be coming from America Jack

Could someone tell me if there is any difference between these profile hubs as i would like one but i don't want to pay British prices so, basically are they the same? I have looked but i don't want to go and order them and find they don't fit my t-pro so i would like to make sure the hub will fit. I mean the rear hub not the front one that is just included in the overall price because you cannot buy them separately on the first link. Linky! and Linky! thanks, Jack

If i ordered one would i order the BMX rear hub because that has the closet size axle width to a mod? And what about the front hub which one would that be? I am asking because i am not sure which ones i would need Thanks, Jack.

I am having exactly the same problem and it only shows after i have have either dropped a few things or gapped something and when it happens it is a bugger to fix. Jack

Can someone tell me the website address for aspire because i am looking to buy a king hub. thanks, Jack

As i am really bored i have read this whole topic and it seems to me that the whole police force of the nation are a set of corrupt t*ats and all laws surrounding cycling should be revised and we should get our needs in there such as riding trials and not be collared for being on a wall and something. Jack.

i have just done this with my new hs33's and so : firstly, undo the hosing on the lever and hold it over a something to catch the fluid, next, undo the bolt on the slave cylinder and all the oil with flow out as the air takes up the space now, cut the hosing then, reattach the hosing to the lever now, undo the bleed nipple on the lever ( hole next to where the hosing go into the lever) next, push the fluid into the cylinder end until the oil or (water) starts to come out of the lever then, put the bleed nipple back in and finally screw the bolt back in the cylinder trying not to get air in the system and then go out and ride ( whilst doing all that make sure your oil does not spill on the brake pads) hope this helps jack

hi, i was out riding today with a couple of mates when them PCSO's roll up and start chatting to us. One of them, a woman saw my friends bike and said she had exactly the same one. they just like told us to not damage anything because they saw one of my friends trash a flower bed after bailing so they were pretty cool with us and then they were on there way. just wondering if any of you have had a strange thing like this happen when the not real police pull up (the ones that patrol but they can't arrest you). thanks, Jack

do what i am going to do and invest in a whole new front end. i am getting new forks, stem, bars, wheel and a hope. this because my friend has just done it to his echo and it feels so nice on the back wheel. Jack

did you know you can be put in jail for riding a bike whilst drunk or high? pointless i know put it is classed a vehicle and so you could endanger someones life.

I have a tensile but i want to change to a try-all since my tensile seems to skip quite a bit in bad places and although it has 72 engagement points i never seem to have the power when i want it so i will say try-all. Jack

I wear shorts all the time. Regardless of the weather. I use to wear jeans but since i got a FF i have knacked two pairs. Jack

they aren't to bad round where i live but they thats only the police that cannot arrest you. but then if the real coppers come there like 'you are not allowed to ride on that' or it's 'you are good but save it for the skatepark' Over all they are pretty cool with us Jack

666 Leeds! its perfectly in the middle Jack

Can you afford the new tensile ace Linky Jack

Deng does not make 20" czars because the 26" are crap and they are are not as popular as his other frames such as echo or zoo!. also if he did make a 20" model, would anyone be interested? Jack

Hi, You may be better asking for bitumen since that is what tar is. Jack

Hi, I would like to know what you think because my friend is going to put a front ISO King hub on his new build but i don't really think it is worth it. It weighs 166g and it is £129.00 from tarty whereas he could get one of the deng disc hubs for £60 and the are only 34g more in weight. The headset as well is very expensive and it is not the only one with the integrated bearings. That is £119.00 and is 98g. But now tensile have released the ace which is basically the same but is weighs less then the Chris King. do you not believe they should now drop there prices to make them more competitive and it would then probably make me want to get them more if their prices were a bit lower. P.S. I did use the search but there were no topics that could answer my question Jack.

Hello and welcome

Neither. I would rather have a Echo or a Adamant. Jack

Does your Friend on his T-bird have a cassette hub on the rear?? If he does then he should not really put a front freewheel on as well since he will get less engagements which would mean it would be more likely to not have the power when you need it. I.E. on a tensile the engagement is every 5 degrees, this is when the wheel moves by pedaling so if he runs a cassette hub as well as a front freewheel it will be a lot less reliable. The set up would still work though. Jack.

Personally I think it is a good question.

Great Video there I found the music did not suit very well though but the editing was good since it is not all about the music. Jack

It would be so uber cool if they ever brought out a trials game for the Xbox 360 or whatever but the controls would be so complicated since how would you balance and all that because to make it like the real thing. But it is a really good idea. Jack.