fatty r
-
Posts
306 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Posts posted by fatty r
-
-
Good to see you back on a bike boy
-
1
-
-
So I had a look and compared them to a some fattys. Neither appear to be welded the fattys are drilled and pinned with hollow pins in the yoke and when you look in there is a line where the bottom of the steerer tube and the fork yoke meet. Actually would they be able to weld the steel steerer to ally forks? When looking and getting the verniers out the hole in the fork yoke on the fattys was 26mm and on the ultras it was 28mm so if it can be done the new steerer would need to be flaired out at the bottom to suit. Or an aluminium one machined. Or would a steel one with a knurled end be an option
hopefully these photos are clear enough to see what I mean
-
Hi so I have a pair of cannondale ultra forks with head shock I was wondering if it’s possible to press out the steerer tube and press in a standard 1 1/8 steerer. Here’s how it is currently any thoughts?
-
A good mid school techy street vid with a good tune
-
6
-
-
these look somewhat similar
-
1
-
-
vario styx
-
28 minutes ago, manuel said:
I’ve been rebuilding the gearbox and diffs on my trx4 and I’ve discovered some seized bearings. Can’t find my plusgas for a temporary fix and small bearings seem unnecessarily expensive, or in China with a huuuuuge delivery time.
bearings out of a headset / caged bearings or figit spinner bearings are small dunt the outer race with a hamme should crack open flick out bearings just a thought
-
ak-mtb#3 had abtrials section cant find on you tube unfortunately
mike bentham ie miketrials
trialskings
new world disorder 2 fat tyre fury
were some of my inspirations / motivators
-
1
-
-
not sure bud not fully sure how to mesure it up either
-
well after 10 years out of trials and the bike hanging on the garage wall its time to start riding agin some new parts and a freshen up here she is
-
5
-
-
hi thought i show a make frome the end of last year ended up my dads christmas present
cut a knife blank out of a lump of plough steel a cupple years ago
then decide one nighe id finish it so after a cupple of evenings in the shed i ended up with this
turned out better than i thought it would now my dad is gnoing to see if he can make a sheith for it
-
4
-
-
always liked these i remember seeing the polished version in halfords inverness in about 2003
-
bite the bullet get a chris king new or seccond hand all agro gone lol happy days
-
toxic rowan johns for me
-
how much pad material i on those pads at the back there huge the chain tensioning screws are strange
-
happy birthday kiddo have a good one
-
im out work have me in fu**ers
-
got th 16th 17th and 18th off work so im up for it
-
im game for it
-
thanks for all the posotive comments guys
-
Nice one man.
A proper seat would look really nice on that.
yea man i luv to whack an inspired seat on it but the seat tube is about as thick as your thumb whitch sucks. got any ideas for an adaptor ?
-
crusty roll tescos garlic and onion dip,roast beef ,cheritso and regge regge sause
-
hey guys got this frame a cupple of weeks ago and finaly got out for a ride today. it feels so much more comfy to ride than my czar. tell me what you think
peace kyle
-
you no its christ mas when the muppets christmas carol is on XD
V brake adapters
in Trials Chat
Posted
Saw this thought it was an option mbay