Matthew_Gibson

Seagulls

Most likely there both French. Be different go for the revell, Or Echo 07

Because they are the best so he says

Plug?

I would like to be you if you happen to slip. Nice hole in your leg

Try pallets or a wall. better gooing onto something than sidehopping air. I tryed side hopping a foot high rail and failed. thats was over the rail . just felt odd as the from wheel goes down too quick

I'd say avid 185 willl be plenty. Stops me good and i'm 12.5 stonne, get a good lever set up and ull be over the handle bars in seconds!

How much? not cheap eh?

Erm yeha i Love chocolate dipped in coffe!

I've only every had Koxx Greens! they were good on a light grind. wud be better on a harsher grind. Recommended Use Brown: Medium grind, dry or wet weather, with or without tar. Great wear life. Red/Yellow: Medium or light grind, dry weather, with or without tar. Blue/Green: Medium or light grind, wet weather, without tar Go for the medium grind. If its too harsh, use browns for a week or so. to deaden the gringd off and wack the yellows back in.

I'd swap frame for my monty. Would love a czar, maybe when they come out. and IF i have the money Why a 2009 one, Gus bet worse every year dont they. By them they will be WB: 2010, SC: 370 BB height. 200mm

Mine sometimes beats harder every so often. I do notice it, buts its not like every other day. Once a month IF that! Gets any worse..... doctor

So can Dave 85 on here! lol! I think he'll do anything!

Got both stock and mod, The Mod is a monty (short) and the Adamant is the long version. Made longer my my forks! So yeah! Both ride as good as each other. STOCK for the win though! Montys just for fun!

Both look rather sweet. I'll have to come and ride with you lads now my exams are over. I'll pm you!

It was a very short on Bens behalf. Was either Yes, No, I likeit. . Etc etc Could have been better

got them back from the welding spot today, put them in ans i looked before and iv done a few hard hitting front wheel moves intensionally. and there a tiny crack. I'll get a new set and keep these as spares

Well ill get a new pair, i'll just use the monty for going to work on for now. I'll be ordering a new pair on monday, so they be here on tuesday with a bit of luck. I'll just get the delivered to my work. or get up and sign for them myself.

I mite do what the pic says. But without the thread and jst hit it in! Or i mite TRY and sell em (ha ha ha lol) and get a new set and make sure I check before cutting em!

How long do you think they'll last? weeks? days?

He's going to shamfer the edges. If the worse come to it, ill make a piece, but that will just "slipped" in there, With plenty of lube and a hammer. well see how it goes. VERY worse case, new(er) forks! bit gutted and they are nice forks. I suppose £70 isnt bad i guess, but I have limited cash for a while. as im buying a car soon.

I put some insulatio0n tape round the fords a to cut them in a hurry cut the at the bottom one, and they were supose to cut at the top one! I was raging with myself. but as I have a good engneering place round the corner. (british steel wold have been best, ano there NOT steel) I went there explained to the guy, who was sceptical about it, but she says he CAN do it! I'll be going down there tmora to see his work. opefully theyll be good! If they do snap at the weld. I can make one up at school/get one done by the metal work guy and see how that goes. But its like what Ali C done with his bars. You did it too! I'm sure a lad on here got the welded Rob i think his name was, on a white BT Maybe that was Trials Nation. (back in the day:)) Thanks!

I have a BRAND NEW pair of Echoi lite forks being welded, as I f**king cut it about 40mm too short Made me cry inside. I just wondered if they would need heat treated after welding the back. The guy at the fabrication shop said hes going to do them. I'm just a bit gutted that I payed £70 and fort I'd f**ked them. If I cnt get em sorted right, whats the shorted they can be on a deng frame or any other with 100mm head tube. There 140mm, too short for anything?