czarbikes Posted June 3, 2008 Report Share Posted June 3, 2008 (edited) Ok i am thinking of spraying my czar frame! Ok the ends black and the middle white but whats the best why to do it I am in the middle of sanding it do and it is taking ages so what is the best why to strip the paint of? You might be thinking why am I swoping my echo lite to my czar it is cos my echo has a crack I am sad to see it go but I won't be on my bike for a bit any way cos of my shoulder so I will have some think to do at the momen And If any one is any good with photoshop could have a go of doing a czar frame ends black and middle white please just to see what it will turn out like it would be a grate help Comments please Cheers jamie Edited June 3, 2008 by czarbikes Quote Link to comment Share on other sites More sharing options...
Nick Harding Posted June 3, 2008 Report Share Posted June 3, 2008 (edited) Use Nitromorse(sp?) to get the paint off. apply it with a paint brush leave it for a few minutes then it will flake off. you can get it from like homebase, B&Q etc. Just do all the bigger tubes, chainstays,seat-stays, top tube ,down tube etc. Then do all the tricky bits after. Edited June 3, 2008 by Nick Harding Quote Link to comment Share on other sites More sharing options...
czarbikes Posted June 3, 2008 Author Report Share Posted June 3, 2008 Cheers m8 that a big help do you no how much it is please Jamie Quote Link to comment Share on other sites More sharing options...
Nick Harding Posted June 3, 2008 Report Share Posted June 3, 2008 Its like £4.99 for 500ml which should be enough for a frame. Bigger one is about 750ml i think its about £8. if you get it on your skin it burns so be warned. but it is bloody good stuff. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.