Alle.C Posted July 2, 2010 Report Share Posted July 2, 2010 as description, what to do ? it's like if it was wet, there is not that bite it should be when I brake, and it squeaks all the time ! Quote Link to comment Share on other sites More sharing options...
MiuSliS Posted July 2, 2010 Report Share Posted July 2, 2010 Check if disc and pads are clean, check if rotor isn't bent and pads are set up right. Quote Link to comment Share on other sites More sharing options...
rtfletcher Posted July 2, 2010 Report Share Posted July 2, 2010 Also make sure all the bolts are up tight, Quote Link to comment Share on other sites More sharing options...
theom Posted July 2, 2010 Report Share Posted July 2, 2010 Pads have glazed over, take them off and rub them on a rough surface to take the glaze off and get them back to the rough bit. Quote Link to comment Share on other sites More sharing options...
Dan6061 Posted July 2, 2010 Report Share Posted July 2, 2010 Sounds like the disc/pads are contaminated. Give them a good wash in warm soapy water, or put them through the dishwasher... Then put them back on, check everything's tight, and rinse off any remaining soap with water. Then just bed them in again by riding around with the brake on, then pour water on, and repeat until it works again. Quote Link to comment Share on other sites More sharing options...
Cahill Trials Kid Posted July 2, 2010 Report Share Posted July 2, 2010 you can buy disk brake cleaner, got mine from halfrods i think, will get any sort of shit off them that could be making them contaminated, which if there squeking the chances are they are contaminated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.