downhill_rob2@hotmail.com Posted September 24, 2011 Report Share Posted September 24, 2011 hi hguys, i need a real quick answer... I have bought a hs11 2011 lever and i im trying to bath bleed it... but its not having any of it! lol Iv taken the grub screw etc out and iv tried the traditional method... but the bleed hole at the lever doesnt seam to be sucking at all... iv even tried blowing and sucking through the bleed bolt at the lever and it its just asif its an air lock and it wont let me suck water through or blow air through from the lever... does anyone know the answer? i dont have a syringe to try that method... help! lol cheers guys Quote Link to comment Share on other sites More sharing options...
Mark W Posted September 24, 2011 Report Share Posted September 24, 2011 Unless you loosen the barbed fitting on your lever so there are 3 threads showing, nothing's going to happen. By moving the barbed fitting out like that, you move those two little O-rings out the way so your fluid can flow out of the bleed port: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.