will ackerley Posted December 29, 2013 Report Share Posted December 29, 2013 Hi I was struggeling to get the pin that goes through my pads on my mono out. Does anyone know how to ? Thanks Will Quote Link to comment Share on other sites More sharing options...
err Posted December 29, 2013 Report Share Posted December 29, 2013 they have an o ring on the head, they can be a bit stiff to get out sometimes 1 Quote Link to comment Share on other sites More sharing options...
will ackerley Posted December 29, 2013 Author Report Share Posted December 29, 2013 thanks so it wont damage my caliper ? Quote Link to comment Share on other sites More sharing options...
James281098 Posted December 29, 2013 Report Share Posted December 29, 2013 (edited) I had that problem yesterday and just push it out and it should be fine (at least it was for me) Edited December 29, 2013 by James281098 Quote Link to comment Share on other sites More sharing options...
fruitbat Posted December 30, 2013 Report Share Posted December 30, 2013 I had the exact same thing other day, got a allen key roughly same size as the pin and pressed real hard till it came out - took some effort. Put it back in without the rubber ring and left the small clip in to retain, still retains the pads. Some advice I read was to squirt some lubricant into the pin and let it soak a few minutes then try again, but chances are some will get onto your pads so only do this if pads will be replaced. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.